HOME在庫検索>在庫情報

部品型式

UDN2962W

製品説明
仕様・特性

Data Sheet 29319.12A‡ 2962 DUAL SOLENOID/MOTOR DRIVER —PULSE-WIDTH MODULATED CURRENT CONTROL 1 IN A 2 SENSE A 3 SINK A 4 SOURCE A 5 THS A LOGIC GROUND Using PWM to minimize power dissipation and maximize load efficiency, the UDN2962W dual driver is recommended for impact printer solenoids and stepper motors. It is comprised of two source/ sink driver pairs rated for continuous operation to ±3 A. It can be connected to drive two independent loads or a single load in the fullbridge configuration. Both drivers include output clamp/flyback diodes, input gain and level shifting, a voltage regulator for singlesupply operation, and pulse-width modulated output-current control circuitry. Inputs are compatible with most TTL, DTL, LSTTL, and low-voltage CMOS or PMOS logic. 6 7 SOURCE B 8 SINK B 9 SENSE B 10 IN B 11 THS B 12 The peak output current and hysteresis for each source/sink pair is set independently. Output current, threshold voltage, and hysteresis are set by the user’s selection of external resistors. At the specified outputcurrent trip level, the source driver turns off. The internal clamp diode then allows current to flow without additional input from the power supply. When the lower current trip point is reached, the source driver turns back on. LOGIC V CC N IG S E D The UDN2962W is in a 12-pin single in-line power-tab package. The tab is at ground potential and needs no insulation. For highcurrent or high-frequency applications, external heat sinking may be required. R O F Dwg. No. D-1001 W E N FEATURES ABSOLUTE MAXIMUM RATINGS at TJ ≤ +150°C T O N Supply Voltage, VCC . . . . . . . . . . . . . . 45 V Peak Output Current, IOUT . . . . . . . . . ±4 A Input Voltage Range, VIN . . . . . . . . . . . . . . . -0.3 V to +7.0 V Package Power Dissipation, PD . . . . . . . . . . . . . . . . . . . See Graph Operating Temperature Range, TA . . . . . . . . . . . . . . . . -20°C to +85°C Storage Temperature Range, TS . . . . . . . . . . . . . . . -55°C to +150°C s s s s s 4 A Peak Output 45 V Min. Sustaining Voltage Internal Clamp Diodes TTL/PMOS/CMOS Compatible Inputs High-Speed Chopper NOTE: Output current rating may be limited by duty cycle, ambient temperature, and heat sinking. Under any set of conditions, do not exceed the specified peak current and a junction temperature of +150°C. Always order by complete part number: UDN2962W .

ブランド

ALTERA

現況

米Intel社とFPGA大手の米Altera社は2015年6月1日(米国時間)、Intel社がAltera社を買収することで合意したと発表した。Intel社がAltera社の1株当たり54米ドルを現金で支払い、買収金額は約167億米ドル(約2兆円)。買収手続きは今後6~9カ月以内に完了する見通しである。 プログラマブルロジックのパイオニア的企業の一つであった。システムオンプログラマブルチップを可能にするべく、様々な技術を開発。最近の例では、チップ中にメモリやマイクロプロセッサ、トランシーバを埋め込んだものも手掛けていた。

現ブランド

INTEL

会社名

Altera Corporation

本社国名

U.S.A

事業概要

マイクロプロセッサ・チップセット・フラッシュメモリなどの開発・製造・販売 世界CPU市場ではここ数年80%近いシェアを維持している。

供給状況

 
Not pic File
お求め部品UDN2962Wは、弊社営業STAFFが市場確認を行いメールにて結果を御報告致します。

「見積依頼」ボタンを押してお気軽にお問合せ下さい。

お支払方法

宅配業者の代金引換又は商品到着後一週間以内の銀行振込となります。


お取引内容はこちら

0.0665698051