19-1800; Rev 1; 5/06
±15kV ESD-Protected, Fail-Safe, High-Speed (10Mbps),
Slew-Rate-Limited RS-485/RS-422 Transceivers
The MAX3080E–MAX3089E are ±15kV electrostatic discharge (ESD)-protected, high-speed transceivers for RS485/RS-422 communication that contain one driver and
one receiver. These devices feature fail-safe circuitry,
which guarantees a logic-high receiver output when the
receiver inputs are open or shorted. This means that the
receiver output will be a logic high if all transmitters on a
terminated bus are disabled (high impedance). The
MAX3080E/MAX3081E/MAX3082E feature reduced
slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing
error-free data transmission up to 115kbps. The
MAX3083E/MAX3084E/MAX3085E offer higher driver
output slew-rate limits, allowing transmit speeds up to
500kbps. The MAX3086E/MAX3087E/ MAX3088Es’ driver slew rates are not limited, making transmit speeds
up to 10Mbps possible. The MAX3089E’s slew rate is
selectable between 115kbps, 500kbps, and 10Mbps by
driving a selector pin with a single three-state driver. All
devices feature enhanced ESD protection. All transmitter
outputs and receiver inputs are protected to ±15kV
using the Human Body Model.
These transceivers typically draw 375µA of supply
current when unloaded, or when fully loaded with the drivers disabled.
All devices have a 1/8-unit-load receiver input impedance
that allows up to 256 transceivers on the bus. The
MAX3082E/MAX3085E/MAX3088E are intended for halfduplex communications, while the MAX3080E/MAX3081E/
MAX3083E/MAX3084E/MAX3086E/MAX3087E are
intended for full-duplex communications. The MAX3089E
is selectable between half-duplex and full-duplex operation. It also features independently programmable
receiver and transmitter output phase via separate pins.
Features
♦ ESD Protection for RS-485 I/O Pins
±15kV, Human Body Model
♦ True Fail-Safe Receiver While Maintaining
EIA/TIA-485 Compatibility
♦ Enhanced Slew-Rate Limiting Facilitates
Error-Free Data Transmission
(MAX3080E–MAX3085E/MAX3089E)
♦ 1nA Low-Current Shutdown Mode (Except
MAX3081E/MAX3084E/MAX3087E)
♦ Pin-Selectable Full/Half-Duplex Operation
(MAX3089E)
♦ Phase Controls to Correct for Twisted-Pair
Reversal (MAX3089E)
♦ Allow Up to 256 Transceivers on the Bus
Applications
RS-422/RS-485 Communications
Level Translators
Transceivers for EMI-Sensitive Applications
Industrial-Control Local Area Networks
Ordering Information
PART
TEMP. RANGE
MAX3080ECSD
0°C to +70°C
MAX3080ECPD
MAX3080EESD
MAX3080EEPD
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
14 SO
14 Plastic DIP
14 SO
14 Plastic DIP
Ordering Information continued at end of data sheet.
Selector Guide
Part
Half/Full
Duplex
Data
Rate
(Mbps)
SlewRate
Limited
LowPower
Shutdown
Receiver/
Driver
Enable
Quiescent Transceivers
Current
On
(µA)
Bus
Pin
Count
IndustryStandard
Pinout
MAX3080E
Full
0.115
Yes
Yes
Yes
375
256
14
75180
MAX3081E
Full
0.115
Yes
No
No
MAX3082E
Half
0.115
Yes
Yes
Yes
375
256
8
75179
375
256
8
75176
MAX3083E
Full
0.5
Yes
Yes
MAX3084E
Full
0.5
Yes
No
Yes
375
256
14
75180
No
375
256
8
MAX3085E
Half
0.5
Yes
75179
Yes
Yes
375
256
8
75176
MAX3086E
Full
10
MAX3087E
Full
10
No
Yes
Yes
375
256
14
75180
No
No
No
375
256
8
MAX3088E
Half
75179
10
No
Yes
Yes
375
256
8
75176
MAX3089E
Selectable
Selectable
Selectable
Yes
Yes
375
256
14
75180*
*Pin compatible with 75180, with additional features implemented using pins 1, 6, 8, and 13.
________________________________________________________________ Maxim Integrated Products
1
For free samples and the latest literature, visit www.maxim-ic.com or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
MAX3080E–MAX3089E
General Description