LC2MOS
Precision Quad SPST Switches
ADG411/ADG412/ADG413
FEATURES
The ADG411, ADG412, and ADG413 contain four independent
SPST switches. The ADG411 and ADG412 differ only in that
the digital control logic is inverted. The ADG411 switches are
turned on with a logic low on the appropriate control input,
while a logic high is required for the ADG412. The ADG413
has two switches with digital control logic similar to that of the
ADG411 while the logic is inverted on the other two switches.
44 V supply maximum ratings
±15 V analog signal range
Low on resistance (< 35 Ω)
Ultralow power dissipation (35 μW)
Fast switching times
tON < 175 ns
tOFF < 145 ns
TTL-/CMOS-compatible
Plug-in replacement for DG411/DG412/DG413
Each switch conducts equally well in both directions when on,
and each has an input signal range that extends to the supplies.
In the off condition, signal levels up to the supplies are blocked.
All switches exhibit break-before-make switching action for use
in multiplexer applications. Inherent in the design is low charge
injection for minimum transients when switching the digital
inputs.
APPLICATIONS
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
PRODUCT HIGHLIGHTS
1. Extended signal range
The ADG411, ADG412, and ADG413 are fabricated on an
enhanced LC2MOS, giving an increased signal range which
extends fully to the supply rails.
GENERAL DESCRIPTION
The ADG411, ADG412, and ADG413 are monolithic CMOS
devices comprising four independently selectable switches.
They are designed on an enhanced LC2MOS process which
provides low power dissipation yet gives high switching speed
and low on resistance.
2. Ultralow power dissipation
3. Low RON
The on resistance profile is very flat over the full analog input
range ensuring excellent linearity and low distortion when
switching audio signals. Fast switching speed coupled with high
signal bandwidth also make the parts suitable for video signal
switching. CMOS construction ensures ultralow power
dissipation, making the parts ideally suited for portable and
battery-powered instruments.
4. Break-before-make switching
This prevents channel shorting when the switches are
configured as a multiplexer.
5. Single-supply operation
For applications where the analog signal is unipolar, the
ADG411, ADG412, and ADG413 can be operated from a
single-rail power supply. The parts are fully specified with a
single 12 V power supply and remain functional with single
supplies as low as 5 V.
FUNCTIONAL BLOCK DIAGRAMS
S1
IN1
D1
S2
D1
S2
D1
S2
IN2
IN2
ADG411
S1
IN1
D2
S3
IN2
D2
S3
ADG412
ADG413
IN3
IN3
IN3
D3
S4
D3
S4
D3
S4
IN4
SWITCHES SHOWN FOR A LOGIC 1 INPUT
Figure 1. ADG411
IN4
D4
SWITCHES SHOWN FOR A LOGIC 1 INPUT
Figure 2. ADG412
00024-002
D4
00024-001
IN4
D2
S3
D4
SWITCHES SHOWN FOR A LOGIC 1 INPUT
00024-003
S1
IN1
Figure 3. ADG413
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2010 Analog Devices, Inc. All rights reserved.
