MP1583
3A, 23V, 385KHz
Step-Down Converter
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MP1583 is a step-down regulator with a
built-in internal Power MOSFET. It achieves 3A
of continuous output current over a wide input
supply range with excellent load and line
regulation.
•
•
•
•
•
•
•
•
•
•
•
•
Current mode operation provides fast transient
response and eases loop stabilization.
Fault
condition
protection
includes
cycle-by-cycle current limiting and thermal
shutdown. An adjustable soft-start reduces the
stress on the input source at startup. In
shutdown mode the regulator draws 20μA of
supply current.
The MP1583 requires a minimum number of
external components, providing a compact
solution.
3A Output Current
Programmable Soft-Start
100mΩ Internal Power MOSFET Switch
Stable with Low ESR Output Ceramic Capacitors
Up to 95% Efficiency
20μA Shutdown Mode
Fixed 385KHz Frequency
Thermal Shutdown
Cycle-by-Cycle Over Current Protection
Wide 4.75V to 23V Operating Input Range
Output Adjustable from 1.22V to 21V
Under-Voltage Lockout
APPLICATIONS
•
•
•
Distributed Power Systems
Battery Chargers
Pre-Regulator for Linear Regulators
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
Efficiency Curve
OPEN =
AUTOMATIC
STARTUP
10μ F
CERAMIC
2
7
8
IN
BS
SW
EN
MP1583
SS
GND
4
10nF
FB
COMP
6
100
10nF
1
3
5
B330A
5.6nF
3.9kΩ
15μ H
10.5kΩ
10kΩ
OUTPUT
2.5V
3A
22μ F
CERAMIC
VIN = 10V
VOUT=5.0V
90
EFFICIENCY (%)
INPUT
4.75V to 23V
VOUT=2.5V
80
VOUT=3.3V
70
60
50
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5
LOAD CURRENT (A)
MP1583_EC01
MP1583 Rev. 3.1
6/20/2011
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2011 MPS. All Rights Reserved.
1