HOME>在庫検索>在庫情報
SVF-61T-P20
VL CONNECTOR 6.2mm pitch/Disconnectable Crimp style Wire-to-wire connectors Specifications ––––––––––––––––––– • Current rating: 20 A AC, DC max. • Voltage rating: 600 V AC, DC max.(300 V in accordance with the Electrical Appliance and Material Safety Law in Japan) • Temperature range: -25˚C to +90˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/7 mΩ max. After environmental tests/10 mΩ max. • Insulation resistance: 1,000 MΩ min. • Withstanding voltage: 2,000 VAC/minute • Applicable wire: AWG #22 to #12 0.3 to 3.5 mm2 • Applicable panel thickness: 0.5 to 2.0 mm * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. The VL connector is a 6.2mm pitch wire-towire connector designed for circuits requiring up to 20A (1 or 2-circuit with AWG #12 wire). • Housing lances for contact retention • Secondary retainer • Suited for circuits with high power requirements • Panel lock construction Note: The current rating varies depending on the number of circuits and the wire size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. Current unit: A Circuits Standards –––––––––––––––––––– 0 1 2 3 4 6 8 12 Recognized E60389 1 Certified LR20812 2R9351103 #12 #14 20 20 19 18 16 16 15 Wire size (AWG) #16 #18 15 15 14 13 12 11 10 #22 6 6 6 6 5 5 4 4 4 4 4 3 3 3 (4, 6, 8 and 12 circuits) #20 8 8 8 7 7 6 6 12.2 19.3 (including retainer) (2, 3 and single-row 4 circuits) 10 10 9 9 8 7 7 40.5 40.5 44.1 (including retainer) 44.1 (including retainer) 14.6 21.7 (including retainer) 40.5 40.5 44.1 (including retainer) 44.1 (including retainer) Shape I Shape II 9.8±0.13 B D C E D 2 12.2±0.13 C E A 0.5±0.13 4.2±0.13 Circuits 18.6±0.13 9.8 ±0.13 3 4 4 (Single-row) 6 A 8 B 12 Receptacle housing Model No. VLR-02V VLR-03V VLR-04V VLR-04VN VLR-06V VLR-08V VLR-12V Note: 1. Punch holes in the panel according to the figures and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. 1 Panel hole dimensions (mm) General tolerance Panel hole shape A B C D E 1 13.8 20.6 5.7 8.5 1 20.0 26.8 5.7 8.5 1.4 2 13.8 20.6 7.0 15.4 4.2 1 26.2 33.0 5.7 8.5 1.4 2 20.0 26.8 7.0 15.4 4.2 2 26.2 33.0 7.0 15.4 4.2 2 38.9 45.4 7.0 15.4 4.2 Applicable panel thickness (mm) 1.4 A, B, D: ±0.13 C, E: ±0.1 0.5∼2.0
JST
日本圧着端子製造株式会社
日本
主にコネクタ、圧着端子を製造する電子接続部品メーカー。
見積依頼→在庫確認→見積回答→注文→検収→支払 となります。