M25PX64
64-Mbit, dual I/O, 4-Kbyte subsector erase,
serial flash memory with 75 MHz SPI bus interface
Features
SPI bus compatible serial interface
75 MHz (maximum) clock frequency
2.7 V to 3.6 V single supply voltage
VDFPN8 (ME)
8 × 6 mm (MLP8)
Dual input/output instructions resulting in an
equivalent clock frequency of 150 MHz:
– Dual output fast read instruction
– Dual input fast program instruction
VDFPN8 (MD)
8 × 6 mm (MLP8)
(with reduced D2
dimension)
Whole memory continuously read by sending
once a fast read or a dual output fast read
instruction and an address
64 Mbit Flash memory
– Uniform 4-Kbyte subsectors
– Uniform 64-Kbyte sectors
SO16 (MF)
300 mils width
TBGA24 (ZM) 6x8 mm
Additional 64-byte user-lockable, one-time
programmable (OTP) area
Automotive Certified Parts Available
Erase capability
– Subsector (4-Kbyte) granularity
– Sector (64-Kbyte) granularity
– Bulk erase (64 Mbits) in 68 s (typical)
Write protections
– Software write protection applicable to
every 64-Kbyte sector (volatile lock bit)
– Hardware write protection: protected area
size defined by three non-volatile bits (BP0,
BP1 and BP2)
Deep power-down mode: 5 μA (typical)
Electronic signature
– JEDEC standard two-byte signature
(7117h)
– Unique ID code (UID) with 16 bytes readonly, available upon customer request
More than 100 000 write cycles per sector
More than 20 years data retention
Packages
– RoHS compliant
October 2009
Rev 9
1/70
www.numonyx.com
1
