ADS2806
ADS
280
6
SBAS178B – DECEMBER 2000 – REVISED MAY 2002
Dual, 12-Bit, 32MHz Sampling
ANALOG-TO-DIGITAL CONVERTER
FEATURES
APPLICATIONS
q SPURIOUS-FREE DYNAMIC RANGE:
73dB at 10MHz fIN
q HIGH SNR: 67dB (2Vp-p), 69dB (3Vp-p)
q INTERNAL OR EXTERNAL REFERENCE
q LOW DLE: ±0.4LSB
q FLEXIBLE INPUT RANGE: 2Vp-p to 3Vp-p
q TQFP-64 POWER PACKAGE
q COMMUNICATIONS IF PROCESSING
q COMMUNICATIONS BASESTATIONS
q TEST EQUIPMENT
q MEDICAL IMAGING
q VIDEO DIGITIZING
q CCD DIGITIZING
DESCRIPTION
reference can be disabled allowing low drive, external references to be used for improved tracking in multichannel systems.
The ADS2806 is a dual, high-speed, high dynamic range,
12-bit pipelined Analog-to-Digital Converter (ADC). This converter includes a high-bandwidth track-and-hold that gives
excellent spurious performance up to and beyond the Nyquist
rate. The differential nature of this track-and-hold and ADC
circuitry minimizes even-order harmonics and gives excellent common-mode noise immunity. The track-and-hold can
also be operated single-ended.
The ADS2806 provides an over-range indicator flag to
indicate an input signal that exceeds the full-scale input
range of the converter. This flag can be used to reduce the
gain of front end gain control circuitry. There is also an
output enable pin to allow for multiplexing and testability on
a PC board.
The ADS2806 employs digital error correction techniques to
provide excellent differential linearity for demanding imaging applications. The ADS2806 is available in a TQFP-64
power package.
The ADS2806 provides for setting the full-scale range of the
converter without any external reference circuitry. The internal
+VS
OEA OVRA
ADS2806
VIN
INA
12-Bit
Pipelined
A/D
T&H
INA
(Opt.)
INT/EXT
Internal
Reference
FSSEL
VIN
INB
T&H
INB
(Opt.)
Error
Correction
Logic
3-State
Outputs
Timing
Circuitry
12-Bit
Pipelined
A/D
Error
Correction
Logic
D12A
•
•
•
D1A
CLK
3-State
Outputs
D12B
•
•
•
D1B
CM
Optional External
Reference
OEB OVRB
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright © 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com