SLIDE SWITCH
JSC Series
SLIDE SWITCH
■ Features
1. The switches in this series are most suitable to highdensity
mounting due to small structures and stroke of only 1.5mm.
2. With the knob extended sideways, the thickness is as small
as 1.3mm from the PWB.
3. The reflow type (SPDT) is also supplied in embossed
taping system suitable for automatic mounter.
■ Specifications
1. Rating
2. Contact Resistance
3. Insulation Resistance
4. Withstanding Voltage
5. Stroke
6. Operating Force
7. Operating Life
8. Changeover Timing
: 0.1A 12V DC
: 100mΩ max.
: 100MΩ min. 500V DC
: 500V AC for one minute
: 1.5mm
: 1.2±0.8N
: 10,000 cycles
: Non-Shorting
■ Applications
Function and band selector switches for headphone stereos,
liquid-crystal TV sets, car radios, camera VCRs, memory
cards, etc.
■ Note
1. Do not wash. The switch unit is nonwashable type.
2. Use a manual soldering iron to solder the switches in the
JSC1310-0101.
3. Suppress the peak temperature of reflow soldering at
240˚C or less. Refer to the following graph for reflow
soldering conditions.
Reflow Soldering Conditions
32