HR series
NEW!
Proportional output thumbwheels - friction hold
Distinctive features and specifications
K Friction hold - 2 versions:
11 detents along the travel or 1 detent at center
K Sealed to IP68
K Backlighting option
K EMI/RFI shielding
K Patented solution
ENVIRONMENTAL SPECIFICATIONS
GENERAL SPECIFICATIONS
• Electronics sealed to IP68 according to IEC 60529
• Shock resistance : 50 g during 11ms (version with 11 detents)
• Salt spray : IEC 512-6, test 11f
• Operating temperature : -30°C to +70°C
• Storage temperature : -40°C to +85°C
• EMI/RFI shielding : IEC 61000-4-3 and ISO 11452-2 (100V/m)
• ESD discharges : 16KV according to EN 61000-4-2
ELECTRICAL SPECIFICATIONS
• APEM SAS patented design
• Mechanical operating angle :
+/- 35°
• Detent operating force :
1,75N ± 0,5 (version w. 11 detents)
2,5N ± 0,5 (version with 1 detent)
• Mechanical life : 100.000 cycles
MATERIALS
• Hall effect sensor
• Supply voltage : 5VDC +/- 0,5V
• Reverse polarity : -10V max.
• Overvoltage : +20V max.
• Center voltage (no load) : 2,5V +/- 0,2V
• Consumption : 11mA max. (single output)
22mA max. (dual output)
• LED supply : 6VDC 10mA
• Wheel : polyamide with colouring
• Support : polyamide, black
• Electronics sealing : epoxy
• Connector : polyester (Molex
0510210700)
• Multiwire lead AWG28
Tolerance : The general tolerance for dimensions in this brochure is ± 0,3 (.012).
The company reserves the right to change specifications without notice.
APEM
www.apem.com
1