HOME在庫検索>在庫情報

部品型式

MB3769APF

製品説明
仕様・特性

FUJITSU SEMICONDUCTOR DATA SHEET DS04-27202-3E ASSP SWITCHING REGULATOR CONTROLLER MB3769A The Fujitsu MB3769A is a pulse-width-modulation controller which is applied to fixed frequency pulse modulation technique. The MB3769A contains wide band width Op-Amp and high speed comparator to construct very high speed switching regulator system up to 700 kHz. Output is suitable for power MOS FET drive owing to adoption of totem pole output. The MB3769A provides stand-by mode at low voltage power supply when it is applied in primary control system. • High frequency oscillator (f = 1 to 700 kHz) • On-chip wide band frequency operation amplifier (BW = 8 MHz typ.) • On-chip high speed comparator (td = 120 ns typ.) PLASTIC DIP 16-PIN (DIP-16P-M04) • Internal reference voltage generator provides a stable reference supply (5 V ± 2%) • Low power dissipation (1.5 mA typ. at standby mode, 8 mA typ. at operating mode) • Output current ± 100 mA (± 600 mA at peak) • High speed switching operation (tr = 60 ns, tf = 30 ns, CL = 1000 pF typ.) • Adjustable Dead-time • On-chip soft start and quick shut down functions • Internal circuitry prohibits double pulse at dynamic current limit operation • Under voltage lock out function (OFF to ON: 10 V typ. ON to OFF: 8 V typ.) PLASTIC FPT 16-PIN (FPT-16P-M06) • On-chip output shut down circuit with latch function at over voltage • On-chip Zener diode (15 V) This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit. 1

ブランド

FUJ

供給状況

 
Not pic File
お探し部品MB3769APFは、clevertechの営業担当が在庫調査を行いメールにて結果を御連絡致します。

「見積依頼」をクリックして どうぞお問合せ下さい。


当サイトの取引の流れ

見積依頼→在庫確認→見積回答→注文→検収→支払 となります。


お取引内容はこちら

0.0686171055