100/140/170/205 MSPS
Analog Flat Panel Interface
AD9888
FEATURES
205 MSPS Maximum Conversion Rate
500 MHz Programmable Analog Bandwidth
0.5 V to 1.0 V Analog Input Range
Less than 450 ps p-p PLL Clock Jitter @ 205 MSPS
3.3 V Power Supply
Full Sync Processing
Sync Detect for “Hot Plugging”
2:1 Analog Input Mux
4:2:2 Output Format Mode
Midscale Clamping
Power-Down Mode
Low Power: <1 W Typical @ 205 MSPS
APPLICATIONS
RGB Graphics Processing
LCD Monitors and Projectors
Plasma Display Panels
Scan Converters
Microdisplays
Digital TV
FUNCTIONAL BLOCK DIAGRAM
RIN
RIN
GIN
GIN
BIN
BIN
HSYNC
HSYNC
8
2:1
MUX
CLAMP
A/D
8
8
8
2:1
MUX
CLAMP
A/D
8
8
8
2:1
MUX
CLAMP
A/D
8
8
2
2:1
MUX
ROUTA
ROUTB
GOUTA
GOUTB
BOUTA
BOUTB
DATACK
HSOUT
VSYNC
VSYNC
SOGIN
SOGIN
COAST
2:1
MUX
2:1
MUX
VSOUT
SYNC
PROCESSING
AND
CLOCK
GENERATION
SOGOUT
REF
REF
BYPASS
CLAMP
CKINV
CKEXT
FILT
SCL
SDA
A0
GENERAL DESCRIPTION
The AD9888 is a complete 8-bit, 205 MSPS monolithic analog
interface optimized for capturing RGB graphics signals from
personal computers and workstations. Its 205 MSPS encode
rate capability and full-power analog bandwidth of 500 MHz
supports resolutions up to UXGA (1600 × 1200 at 75 Hz).
For ease of design and to minimize cost, the AD9888 is a fully
integrated interface solution for flat panel displays. The AD9888
includes an analog interface with a 205 MHz triple ADC with
internal 1.25 V reference, PLL to generate a pixel clock from
HSYNC and COAST, midscale clamping, and programmable
gain, offset, and clamp control. The user provides only a 3.3 V
power supply, analog input, and HSYNC and COAST signals.
Three-state CMOS outputs may be powered from 2.5 V to 3.3 V.
AD9888
SERIAL REGISTER
AND
POWER MANAGEMENT
The AD9888’s on-chip PLL generates a pixel clock from HSYNC
and COAST inputs. Pixel clock output frequencies range from
10 MHz to 205 MHz. PLL clock jitter is typically less than 450 ps
p-p at 205 MSPS. When the COAST signal is presented, the
PLL maintains its output frequency in the absence of HSYNC.
A sampling phase adjustment is provided. Data, HSYNC, and
clock output phase relationships are maintained. The PLL can
be disabled and an external clock input can be provided as the
pixel clock. The AD9888 also offers full sync processing for composite sync and Sync-on-Green applications.
A clamp signal is generated internally or may be provided by the
user through the CLAMP input pin. This interface is fully programmable via a 2-wire serial interface.
Fabricated in an advanced CMOS process, the AD9888 is provided in a space-saving 128-lead MQFP surface-mount plastic
package and is specified over the 0°C to 70°C temperature range.
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© 2003 Analog Devices, Inc. All rights reserved.
