0.1 µF, 5 V Powered CMOS
RS-232 Drivers/Receivers
ADM206–ADM211/ADM213
FEATURES
TYPICAL OPERATING CIRCUIT
0.1 µF to 10 µF capacitors
120 kB/s data rate
Two receivers active in shutdown (ADM213)
On-board dc-to-dc converters
±9 V output swing with 5 V supply
Low power (15 mW)
Low power shutdown ≤ 5 µW
±30 V receiver input levels
Latch-up free
Plug-in upgrade for MAX205-211/213
5V INPUT
+
0.1µF
16V
+
12
C1+
14
0.1µF
16V
C1–
15
C2+
16
C2–
+5V TO +10V
VOLTAGE
DOUBLER
VCC 11
+10V TO –10V
VOLTAGE
INVERTER
V– 17
V+ 13
0.1µF
+ 6.3V
0.1µF
+ 16V
T1IN
T1OUT
T2IN
6
T2
3
T2OUT
T3IN
20
T3
1
T3OUT
21
T4
28
T4OUT
8
R1
9
R1IN
5
R2
4
R2IN
R3OUT
26
R3
27
R3IN
R4OUT
22
R4
23
R4IN
R5OUT
19
R5
18
R5IN
EN
TTL/CMOS
OUTPUTS
2
R2OUT
Computers
Peripherals
Modems
Printers
Instruments
T1
R1OUT
APPLICATIONS
7
T4IN
TTL/CMOS
INPUTS1
+
0.1µF
24
25
SD
GND
ADM211
RS-232
OUTPUTS
RS-232
INPUTS2
NOTES
1INTERNAL 400kΩ PULL-UP RESISTOR ON EACH TTL/CMOS INPUT.
2INTERNAL 5kΩ PULL-DOWN RESIST OR ON EACH RS-232 INPUT.
GENERAL DESCRIPTION
The ADM2xx family of line drivers/receivers is intended for all
EIA-232-E and V.28 communications interfaces, especially in
applications where ±12 V is not available. The ADM206,
ADM211, and ADM213 feature a low power shutdown mode
that reduces power dissipation to less than 5 µW, making them
ideally suited for battery-powered equipment. The ADM213
has an active low shutdown and an active high receiver-enable
control. Two receivers of the ADM213 remain active during
shutdown. This feature is useful for ring indicator monitoring.
Figure 1.
All members of the ADM2xx family, except the ADM209,
include two internal charge pump voltage converters that allow
operation from a single 5 V supply. These parts convert the 5 V
input power to the ±10 V required for RS-232 output levels.
The ADM209 is designed to operate from 5 V and 12 V supplies.
An internal +12 V to –12 V charge pump voltage converter
generates the –12 V supply.
Table 1. Selection Table
Part
Number
ADM206
ADM207
ADM208
ADM209
ADM211
ADM213
Power Supply
Voltage
5V
5V
5V
5 V and 9 V to
13.2 V
5V
5V
TTL ThreeState EN
Number of RS232 Drivers
4
5
4
3
Number of
RS-232 Receivers
3
3
4
5
External
Capacitors
4
4
4
2
Low Power
Shutdown (SD)
Yes
No
No
No
Yes
No
No
Yes
Number of Receivers
Active in Shutdown
0
0
0
0
4
4
5
5
4
4
Yes
Yes (SD)
Yes
Yes (EN)
0
2
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
00067-0-001
10
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703
© 2005 Analog Devices, Inc. All rights reserved.