RTBH Series
1-2 Pole Coded Rotary Switches
Features/Benefits
• Totally sealed
• Detent angles, 15 , 22.5 , 30 and 36
• Multi pole
• Coding functions
• Robust construction
• RoHS Compliant
Electrical Data
Silver
Gold
SWITCHING MODE:
MAX. SWITCHING POWER:
Max. SWITCHING CURRENT:
MIN. SWITCHING CURRENT:
MAX. CARRYING CURRENT:
MAX. VOLTAGE:
MIN. VOLTAGE:
BOUNCE:
CONTACT RESISTANCE after life:
DIALECTRIC STRENGTH between
contacts or contacts and frame:
INSULATION RESISTANCE between
contacts or contacts and frame:
BBM*
5VA
250 mA
10 mA
5A
25V
5V
<5ms
<100mΩ
BBM*
0.2VA
20 mA
1 mA
1A
25V
1V
<5ms
<100mΩ
500 V rms
500 V rms
>109Ω
>109Ω
Environmental Data
OPERATING TEMPERATURE:
STORAGE TEMPERATURE:
TOTALLY SEALED:
-250C to +700C
-400C to +850C
Immersion test acc. to MIL
R22.097 F and NFC 20631/QF
* BBM= Break Before Make (non-starting)
Materials
Mechanical Data
NUMBER OF BANKS:
OPERATING TORQUE:
MECHANICAL STOP RESISTANCE:
BUSHING MOUNTING TORQUE:
Typical Applications
• Telecommunications
• Military
• Instrumentation
• Heavy-duty industrial equipment
1 to 4
5 Ncm±30% (with 1 module)
>70 Ncm
100 Ncm
HOUSING: PBT thermoplastic and PC thermoplastic
STATIONARY CONTACTS & TERMINALS: Nickel plated Brass aith
additional Gold or Silver plating, insert molded in PBT thermoplastic.
ROTOR: Printed circuit, gold or silver plated.
ACTUATOR: Steel
BUSHING: Brass
HARDWARE: Stop pin and spring: Stainless steel
All models are RoHS compliant and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
Rotary
K
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages K-19 thru K-23. For additional options not shown in catalog, consult Customer Service Center.
Designation
RTBH
Indexing
1 15°/24 positions max.
2 22.5°/16 positions max.
3 30°/12 positions max.
4 36°/10 positions max.
Contact Material
S Silver plated, matte-tin terminal
P Gold plated, matte-tin terminal
Number
of Banks**
1 1 Bank
2 2 Banks
3 3 Banks
4 4 Banks
Actuator Length
Z (.984) 25 mm
Actuator Option Angle*
N None for actuators without a flat
Shaft Diameter & Style***
0 0° angle
N Metric shaft .236 (6,0)
3 30° angle
P Standard shaft .250 (6,35)
6 60° angle
F Metric shaft with flat .236 (6,0)
9 90° angle
G Standard shaft with flat .250 (6,35) 2 120° angle
S Metric shaft with slot .236 (6,0)
8 180° angle
T Standard shaft with slot .250 (6,35) 7 270° angle
Seal
A Standard bushing for panel mount
D Sealed bushing for panel mount
Switch Function Number of Poles or code (binary
code = B, complement = C, direct +complement
= BC) (first digit), Stop (with=S, without=W),
Maximum Position (third & fourth digit)
1S02 SP, 02 positions with stop
1S03 SP, 03 positions with stop
1S04 SP, 04 positions with stop
1S05 SP, 05 positions with stop
1S06 SP, 06 positions with stop
1S07 SP, 07 positions with stop
1W16 SP, 16 positions without stop
1S10 SP, 10 positions with stop
1W10 SP, 10 positions without stop 1S24 SP, 24 positions with stop
1W24 SP, 24 positions without stop
1S11 SP, 11 positions with stop
2S04 DP, 4 positions with stop
1S12 SP, 12 positions with stop
1W12 SP, 12 positions without stop 2S05 DP, 5 positions with stop
2S06 DP, 6 positions with stop
1S14 SP, 14 positions with stop
GS_ _ Gray Code with stop (indicate position)
1S16 SP, 16 positions with stop
* Other angles available by request
** Several functions can be combined. For more information consult us.
GW_ _
BS_ _
BW_ _
CS_ _
CW_ _
ES_ _
EW_ _
Gray Code without stop (indicate position) only can be 10,12, 16, 24 based on indexing
Binary Code with stop (indicate position)
Binary Code without stop (indicate position) only can be 10,12, 16, 24 based on indexing
Complement with stop (indicate position)
Complement without stop (indicate position) only can be 10,12, 16, 24 based on indexing
Direct+Complement with stop (indicate position)
Direct+Complement without stop (indicate position) only can be 10,12, 16, 24 based on indexing
***Note: Metric diameter shafts are only available with metric diameter bushings, standard 1.250 inch
diameter shafts are only available with standard 3/8 diameter bushings.
NOTE: S&T Shaft Diameter and Style are only available with Actuator Option angle 0, 6, 9, 2.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
K–18
www.ck-components.com
