LM158, LM258, LM358
Low-power dual operational amplifiers
Datasheet - production data
Features
• Internally frequency-compensated
• Large DC voltage gain: 100 dB
• Wide bandwidth (unity gain): 1.1 MHz
(temperature compensated)
DIP8
(Plastic package)
• Very low supply current per operator
essentially independent of supply voltage
• Low input bias current: 20 nA
(temperature compensated)
SO8 and MiniSO8
(Plastic micropackage)
• Low input offset voltage: 2 mV
• Low input offset current: 2 nA
• Input common-mode voltage range includes
negative rails
DFN8 2 x 2 mm
(Plastic micropackage)
• Differential input voltage range equal to the
power supply voltage
• Large output voltage swing 0 V to (VCC+ -1.5 V)
Description
TSSOP8
(Thin shrink small outline package)
Pin connections
(Top view)
Out1
1
8
Vcc+
In1-
2
7
Out2
In1+
3
6
In2-
Vcc-
4
5
In2+
June 2013
This is information on a product in full production.
These circuits consist of two independent, highgain, internally frequency-compensated op-amps,
specifically designed to operate from a single
power supply over a wide range of voltages. The
low-power supply drain is independent of the
magnitude of the power supply voltage.
Application areas include transducer amplifiers,
DC gain blocks and all the conventional op-amp
circuits, which can now be more easily
implemented in single power supply systems. For
example, these circuits can be directly supplied
with the standard +5 V, which is used in logic
systems and will easily provide the required
interface electronics with no additional power
supply.
In linear mode, the input common-mode voltage
range includes ground and the output voltage can
also swing to ground, even though operated from
only a single power supply voltage.
DocID2163 Rev 11
1/22
www.st.com