DGP30W
DAMPER SINTERED GLASS JUNCTION
PLASTIC RECTIFIER
VOLTAGE:1500V
CURRENT: 3.0A
FEATURE
DO-201AD
Specially designed for clamping circuits, horizontal deflection
systems and damper applications
High temperature metallurgically bonded construction
3.0 ampere operation at Ta=50℃ with no thermal runaway
Sintered glass cavity free junction
Capable of meeting environmental standard of MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified Current 3/8”lead
length at Ta =50℃
Peak Forward Surge Current 8.3ms single Half sinewave superimposed on rated load at Ta=50℃
Maximum Instantaneous Forward Voltage at 3.0A
Maximum full load reverse current full cycle average
0.375”(9.5mm) lead length at Ta=70℃
Maximum DC Reverse Current
Ta =25℃
at rated DC blocking voltage
Ta =100℃
Typical Reverse Recovery Time
(Note 1)
Typical Junction Capacitance
(Note 2)
Typical Thermal Resistance
(Note 3)
Storage and Operating Junction Temperature
DGP30W
units
Vrrm
Vrms
Vdc
1500
1050
1500
V
V
V
If(av)
3.0
A
Ifsm
100.0
A
Vf
1.2
V
Ir(av)
200.0
µA
Ir
Trr
Cj
Rth(ja)
Tstg, Tj
5.0
100.0
1.0
40.0
20.0
-65 to +175
µA
µS
pF
℃/W
℃
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 0.375”(9.5mm) lead length, with leads attached to heat sink
Rev.A1
www.gulfsemi.com
