HOME＞在庫検索＞在庫情報
DS1035Z-6
DS1035 3-in-1 High–Speed Silicon Delay Line www.dalsemi.com FEATURES All-silicon timing circuit Three independent buffered delays Stable and precise over temperature and voltage Leading and trailing edge precision preserves the input symmetry Standard 8-pin DIP and 8-pin SOIC (150 mil) Vapor phasing, IR and wave solderable Available in Tape and Reel PIN ASSIGNMENT IN1 1 8 VCC IN2 2 7 OUT1 IN3 3 6 OUT2 4 5 OUT3 GND DS1035M 8-Pin DIP See Mech. Drawings Section IN1 1 8 VCC IN2 2 7 OUT1 IN3 3 6 OUT2 GND 4 5 OUT3 DS1035Z 8-Pin SOIC (150-mil) See Mech. Drawings Section PIN DESCRIPTION IN1-IN3 OUT1-OUT3 NC VCC GND (Sub) - Input Signals - Output Signals - No Connection - +5 Volt Supply - Ground - Internal substrate connection, do not make any external connections to these pins DESCRIPTION The DS1035 series is a low-power +5-volt high-speed version of the popular DS1013 and complements the DS1033 +3.3 Volt version. The DS1035 series of delay lines have three independent logic buffered delays in a single package. The device is Dallas Semiconductor’s fastest 3-in-1 delay line. It is available in a standard 8-pin DIP and 150 Mil 8-pin Mini-SOIC. The device features precise leading and trailing edge accuracies. It has the inherent reliability of an allsilicon delay line solution. The DS1035’s initial tolerance is ±1.5 or ±2.0 ns with an additional tolerance over temperature and voltage of ±1.0 ns or ±1.5 ns, depending on the delay value. Each output is capable of driving up to 10 LS loads. Standard delay values are indicated in Table 1. Customers may contact Dallas Semiconductor at (982) 371-4348 for further information. 1 of 6 111799
見積依頼→在庫確認→見積回答→注文→検収→支払 となります。
