Glueable
Chip Resistor
GCR Series
· Suitable for conductive adhesive
· Planar and wraparound versions
· High temperature operation to 200°C
· Non-magnetic (G, P & EW types)
· Range 0805 to 2512 at 1R0 to 10M
· RoHS compliant
Electrical Data
Size
0805
Power @70°C
W
Resistance range
1206
0.125
0.25
ohms
Tolerance
2010
0.625
V
TCR
1, 5
ppm/°C
Operating temperature
150
200
°C/W
400
500
<10R:200 ≥10R:100
°C
Thermal Impedance
1
1R0 to 10M
%
LEV
2512
-55 to +200
220
Values
160
75
40
E24 or E96 preferred - other values to special order
Physical Data (All dimensions in mm and nominal weight in g)
L
W
T
A&C
Wt.
0805
2.0
+0.2/-0.15
1.25
±0.15
0.5
±0.15
0.4
±0.2
0.009
1206
3.15
+0.2/-0.2
1.6
±0.15
0.5
±0.15
0.45
±0.2
0.020
2010
5.0
±0.2
2.5
±0.2
0.65
±0.15
0.5
+0.25/-0.3
0.036
2512
6.25
±0.25
3.2
±0.2
0.65
±0.15
0.6
+0.25/-0.3
G & P types
0.055
EW & GW types
T
W
L
T
A
L
A
W
Wrap-around terminations
(3 faces)
Construction
Marking
Planar gold G type or PtAg P types: Electrodes, resistor material
and overglaze are printed onto an alumina substrate. The
resistors are laser trimmed to the required value and protected.
The components are not marked; all data is printed onto the
packaging.
Wraparound EW type: Thick-film PtAg electrodes, resistor
material and overglaze are printed onto an alumina substrate.
The resistors are laser trimmed to the required value and
protected. The terminations are wraparound coated with a
polymer Ag material.
Solvent Resistance
The component is resistant to all normal industrial cleaning
solvents suitable for printed circuits.
Wraparound GW type: These are made as the EW type then
plated with a nickel barrier and Gold. All termination styles are
suitable for attachment with conductive adhesive.
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
© TT electronics plc
08. 11