MOTOROLA
Order this document
by H11G1/D
SEMICONDUCTOR TECHNICAL DATA
H11G1 *
[CTR = 1000% Min]
GlobalOptoisolator™
H11G2*
6-Pin DIP Optoisolators
Darlington Output (On-Chip Resistors)
The H11G1, H11G2 and H11G3 devices consist of gallium arsenide IREDs
optically coupled to silicon photodarlington detectors which have integral
base–emitter resistors. The on–chip resistors improve higher temperature
leakage characteristics. Designed with high isolation, high CTR, high voltage
and low leakage, they provide excellent performance.
[CTR = 1000% Min]
H11G3
[CTR = 200% Min]
*Motorola Preferred Devices
STYLE 1 PLASTIC
• High CTR, H11G1 & H11G2 — 1000% (@ IF = 10 mA), 500% (@ IF = 1 mA)
• High V(BR)CEO, H11G1 — 100 Volts, H11G2 — 80 Volts
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
6
Applications
• Interfacing and coupling systems of different potentials and impedances
1
STANDARD THRU HOLE
CASE 730A–04
• Phase and Feedback Controls
• General Purpose Switching Circuits
• Solid State Relays
SCHEMATIC
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
1
6
2
5
3
4
INPUT LED
Reverse Voltage
VR
6
Volts
Forward Current — Continuous
IF
60
mA
Forward Current — Peak
Pulse Width = 300 µs, 2% Duty Cycle
IF
3
Amps
LED Power Dissipation @ TA = 25°C
Derate above 25°C
PD
120
1.41
mW
mW/°C
VCEO
100
80
55
Volts
VEBO
7
Volts
Collector Current — Continuous
IC
150
mA
Detector Power Dissipation @ TA = 25°C
Derate above 25°C
PD
150
1.76
mW
mW/°C
PD
250
2.94
mW
mW/°C
OUTPUT DETECTOR
Collector–Emitter Voltage
H11G1
H11G2
H11G3
Emitter–Base Voltage
PIN 1.
2.
3.
4.
5.
6.
ANODE
CATHODE
N.C.
EMITTER
COLLECTOR
BASE
TOTAL DEVICE
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
Operating Junction Temperature Range(2)
Storage Temperature Range(2)
Soldering Temperature (10 s)
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 sec Duration)
TA
– 55 to +100
°C
Tstg
– 55 to +150
°C
TL
260
°C
VISO
7500
Vac(pk)
1. Isolation surge voltage is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
©MotorolaInc. 1995
Motorola, Optoelectronics Device Data
1