HA-5102, HA-5104
®
Data Sheet
August 2002
Dual and Quad, 8MHz and 60MHz, Low
Noise Operational Amplifiers
FN2925.7
Features
Low noise and high performance are key words describing
HA-5102 and HA-5104. These general purpose amplifiers
offer an array of dynamic specifications including a 3V/µs
slew rate and 8MHz bandwidth. Complementing these
outstanding parameters is a very low noise specification of
4.3nV/√Hz at 1kHz.
Fabricated using the Intersil high frequency DI process,
these operational amplifiers also offer excellent input
specifications such as a 0.5mV offset voltage and 30nA
offset current. Complementing these specifications are
108dB open loop gain and 60dB channel separation.
Consuming a very modest amount of power (90mW/
package for duals and 150mW/package for quads),
HA-5102/04 also provide 15mA of output current.
• Low Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3nV/√Hz
• Bandwidth . . . . . . . . . . . . . . . . . . . 8MHz (Compensated)
• Slew Rate. . . . . . . . . . . . . . . . . . . . 3V/µs (Compensated)
• Low Offset Voltage . . . . . . . . . . . . . . . . . . . . . . . . . 0.5mV
• Available in Duals or Quads
Applications
• High Q, Active Filters
• Audio Amplifiers
• Instrumentation Amplifiers
• Integrators
• Signal Generators
• For Further Design Ideas, See Application Note AN554
This impressive combination of features make this series of
amplifiers ideally suited for designs ranging from audio
amplifiers and active filters to the most demanding signal
conditioning and instrumentation circuits.
These operational amplifiers are available in dual or quad
form with industry standard pinouts allowing for immediate
interchangeability with most other dual and quad operational
amplifiers.
Pinouts
HA-5102 (PDIP, CERDIP)
TOP VIEW
OUT1 1
-IN1 2
+IN1 3
8 V+
7 OUT2
+
+
V- 4
6 -IN2
5 +IN2
HA-5104 (CERDIP)
TOP VIEW
HA-5102 Dual, Comp. HA-5104 Quad, Comp.
Refer to the /883 data sheet for military product.
OUT1 1
Ordering Information
TEMP. RANGE
PART NUMBER
(oC)
HA3-5102-5
0 to 75
-IN1 2
14 OUT4
1
4
+
+
+IN1 3
PACKAGE
8 Ld PDIP
PKG. NO
12 +IN4
V+ 4
E8.3
+IN2 5
HA7-5102-2
-55 to 125
8 Ld CERDIP
F8.3A
-IN2 6
HA1-5104-2
-55 to 125
14 Ld CERDIP
F14.3
0 to 75
14 Ld CERDIP
-40 to 85
16 Ld SOIC
M16.3
+
+
-
-
10 +IN3
F14.3
HA9P5104-9
11 V-
OUT2 7
HA1-5104-5
13 -IN4
2
3
8 OUT3
HA5104 (SOIC)
TOP VIEW
16 OUT4
OUT1 1
-IN1 2
1
+
4
+
+IN1 3
+IN2 5
-IN2 6
OUT2 7
NC 8
15 -IN4
14 +IN4
13 V-
V+ 4
1
9 -IN3
+
-
2
+
-
3
12 +IN3
11 -IN3
10 OUT3
9 NC
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved