LVCMOS Dual-Frequency Programmable
VCXO
IDT8N0DV85
DATA SHEET
General Description
Features
The IDT8N0DV85 is a LVCMOS Dual-Frequency Programmable
VCXO with very flexible frequency and pull-range programming
capabilities. The device uses IDT’s fourth generation FemtoClock®
NG technology for an optimum of high clock frequency and low
phase noise performance. The device accepts 2.5V or 3.3V supply
and is packaged in a small, lead-free (RoHS 6) 6-lead ceramic 5mm
x 7mm x 1.55mm package.
•
•
Fourth generation FemtoClock® NG technology
•
•
•
Two factory-programmed output frequencies
The device can be factory-programmed to any two frequencies in the
range of 15.476MHz to 260MHz to the very high degree of frequency
precision of 218Hz or better. The output frequency is selected by the
FSEL pin. The extended temperature range supports wireless
infrastructure, telecommunication and networking end equipment
requirements.
•
•
•
•
•
•
One 2.5V or 3.3V LVCMOS clock output
Programmable clock output frequency from 15.476MHz to
260MHz
Frequency programming resolution is 218Hz and better
Absolute pull-range (APR) programmable from ±4.5 to
±754.5ppm
RMS phase jitter @ 156.25MHz (12kHz - 20MHz): 0.65ps (typical)
RMS phase jitter @ 156.25MHz (1kHz - 40MHz): 0.94ps (typical)
2.5V or 3.3V supply voltage
-40°C to 85°C ambient operating temperature
Lead-free (RoHS 6) 6-lead ceramic 5mm x 7mm x 1.55mm
package
Block Diagram
Pin Assignment
PFD
&
LPF
÷P
OSC
FemtoClock® NG
VCO
1950-2600MHz
VC 1
Q
6 VCC
FSEL 2
5 DNU
GND 3
÷N
4 Q
114.285 MHz
2
A/D
VC
FSEL
Pulldown
÷MINT, MFRAC
9
7
25
Configuration Register (ROM)
(Frequency, Pull range, Polarity)
IDT8N0DV85ACD REVISION A AUGUST 14, 2012
1
IDT8N0DV85
6-lead ceramic 5mm x 7mm x 1.55mm
package body
CD Package
Top View
©2012 Integrated Device Technology, Inc.