M39003/09
www.vishay.com
Vishay Sprague
Solid-Electrolyte TANTALEX® Capacitors,
Military MIL-PRF-39003/09 Qualified, Style CSR21
FEATURES
•
•
•
•
•
•
•
•
Hermetically sealed
Metal cased
Axial lead
Weibull failure rates B, C, D
Exponential failure rates M, P, R, S
Low ESR
100 % surge current test
Tape and reel available per EIA-296 standard
PERFORMANCE CHARACTERISTICS
STYLE, MILITARY SPECIFICATION SHEET
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 5.6 μF to 330 μF
Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %
Voltage Rating: 6 VDC to 50 VDC
Style CSR21, M39003/09
MIL-PRF-39003/09
DESCRIPTION
Solid-Electrolyte TANTALEX® capacitors to military
specification MIL-PRF-39003 - Exponential and Weibull
Distribution: Hermetically sealed, metal cased, axial leaded
tubular capacitors manufactured as military style CSR21.
These capacitors are furnished to the requirements of the
military specification, including marking, testing and
inspection.
In accordance with the specification, all capacitors are
marked with the military part number (M39003/xx-xxxx)
rather than the older style designation (CSRxxxxxxxx) and
should be ordered as such. All capacitors covered by
MIL-PRF-39003 are now ordered with the military part
number as illustrated in the Part Numbering System chart.
Capacitors must not be ordered using the style number
identification.
MIL-PRF-39003 establishes failure rates (expressed in
percent per 1000 h) based on exponential and Weibull
distribution. Care must be exercised in ordering to insure the
part number correctly identifies the desired failure rate level.
In addition, each order for military style CSR13, CSR21,
CSR23 capacitors requiring government inspection must
state whether inspection is to be at the destination or at the
Vishay Sprague plant. Orders requiring source inspection
cannot be shipped until this has been accomplished.
For information on the performance characteristics of these
capacitors, please refer to the latest issue of the military
specification.
ORDERING INFORMATION
M39003
/09
-2085
B
/TR
BASIC
DOCUMENT NUMBER
SLASH SHEET
DASH NUMBER
SURGE CURRENT
OPTION LETTER
PACKAGING OPTION (1)
Indicates the Basic
Specification; in this
case MIL-PRF-39003
Indicates the
Specification Sheet
of the Basic Military
Specification
Taken from Ratings
table of the
Specification Sheet
Blank = Standard, + 25 °C,
after Weibull
B = - 55 °C and + 85 °C,
after Weibull
C = - 55 °C and + 85 °C,
before Weibull
E = - 55 °C and + 85 °C,
after Weibull, high
temperature solder
F = - 55 °C and + 85 °C,
before Weibull, high
temperature solder
H = + 25 °C, after Weibull,
high temperature solder
Blank = Bulk
/TR = Tape and reel
/HR = Tape and reel, half reel
/PR = Tape and reel, partial reel
/RR = Tape and reel, option R
/WR = Tape and reel, option W
Note
(1) See detailed packaging information following the Standard Ratings table.
Revision: 18-Jun-12
Document Number: 40158
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
