64Mb: x4, x8, x16 SDRAM
Features
SDR SDRAM
MT48LC16M4A2 – 4 Meg x 4 x 4 Banks
MT48LC8M8A2 – 2 Meg x 8 x 4 Banks
MT48LC4M16A2 – 1 Meg x 16 x 4 Banks
Features
Options
Marking
• Configuration
– 16 Meg x 4 (4 Meg x 4 x 4 banks)
– 8 Meg x 8 (2 Meg x 8 x 4 banks)
– 4 Meg x 16 (1 Meg x 16 x 4 banks)
• Write recovery (tWR)
– tWR = 2 CLK
• Plastic package – OCPL1
– 54-pin TSOP II (400 mil)
– 54-pin TSOP II (400 mil) Pb-free
– 54-ball VFBGA (x16 only) (8mm x
8mm)
– 54-ball VFBGA (x16 only) (8mm x
8mm)
• Timing – cycle time
– 6ns @ CL = 3
– 6ns @ CL = 3
– 7.5ns @ CL = 3 (PC133)
– 7.5ns @ CL = 2 (PC133)
• Self refresh
– Standard
– Low-power
• Operating temperature range
– Commercial (0˚C to +70˚C)
– Industrial (–40˚C to +85˚C)
– Automotive (–40˚C to +105˚C)
• Revision
• PC100- and PC133-compliant
• Fully synchronous; all signals registered on positive
edge of system clock
• Internal, pipelined operation; column address can
be changed every clock cycle
• Internal banks for hiding row access/precharge
• Programmable burst lengths: 1, 2, 4, 8, or full-page
• Auto precharge, includes concurrent auto precharge
and auto refresh modes
• Self refresh modes: standard and low-power
(not available on AT devices)
• Auto refresh
– 64ms, 4096-cycle refresh
(commercial and industrial)
– 16ms, 4096-cycle refresh
(automotive)
• LVTTL-compatible inputs and outputs
• Single 3.3V ±0.3V power supply
Notes:
16M43
8M8
4M16
A2
TG
P
F4
B42
-63
-6A
-753
-7E
None
L3
None
IT
AT2
:G, :J
1. Off-center parting line.
2. Contact Micron for availability.
3. Available only on Revision G.
Table 1: Key Timing Parameters
CL = CAS (READ) latency
Speed Grade
Clock
Frequency (MHz)
Target tRCD-tRP-CL
tRCD
(ns)
tRP
(ns)
CL (ns)
-6
167
3-3-3
18
18
18
-6A
167
3-3-3
18
18
18
-75
133
3-3-3
20
20
20
-7E
133
2-2-2
15
15
15
PDF: 09005aef80725c0b
64mb_x4x8x16_sdram.pdf - Rev. V 05/15 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 1999 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
