Quad Precision, High
Speed Operational Amplifier
OP467
PIN CONFIGURATIONS
High slew rate: 170 V/μs
Wide bandwidth: 28 MHz
Fast settling time: <200 ns to 0.01%
Low offset voltage: <500 μV
Unity-gain stable
Low voltage operation: ±5 V to ±15 V
Low supply current: <10 mA
Drives capacitive loads
OUT A 1
14 OUT D
–IN A 2
+
13 –IN D
+
12 +IN D
+IN A 3
V+ 4
OP467
+
+
–IN B 6
11 V–
10 +IN C
+IN B 5
9
–IN C
8
OUT B 7
OUT C
The dc performance of the OP467 includes less than 0.5 mV of
offset, a voltage noise density below 6 nV/√Hz, and a total
supply current under 10 mA. The common-mode rejection
ratio (CMRR) is typically 85 dB. The power supply rejection
ratio (PSRR) is typically 107 dB. PSRR is maintained to better than
40 dB with input frequencies as high as 1 MHz. The low offset and
drift plus high speed and low noise make the OP467 usable in
applications such as high speed detectors and instrumentation.
+IN C
9
NC
10 11 12 13
NC
NC
NC = NO CONNECT
9
–IN C
8
NC
11 –IN C
10 OUT C
OUT C
NC
+IN B 8
12 +IN C
V–
15
14
NC 7
13 V–
16
(TOP VIEW)
–IN B
–IN B 6
OUT B 7
OP467
OP467
V+ 6
00302-003
14 +IN D
V+ 4
OUT D
NC
NC = NO CONNECT
Figure 2. 16-Lead SOIC (S Suffix)
Figure 3. 20-Terminal LCC (RC Suffix)
V+
+IN
OUT
–IN
V–
00302-004
The internal compensation of the OP467 ensures stable unitygain operation, and it can drive large capacitive loads without
oscillation. With a gain bandwidth product of 28 MHz driving a
30 pF load, output slew rate is 170 V/μs, and settling time to
0.01% in less than 200 ns, the OP467 provides excellent
dynamic accuracy in high speed data acquisition systems. The
channel-to-channel separation is typically 60 dB at 10 MHz.
+IN D
17
OUT B
The OP467 is a quad, high speed, precision operational
amplifier. It offers the performance of a high speed op amp
combined with the advantages of a precision op amp in a single
package. The OP467 is an ideal choice for applications where,
traditionally, more than one op amp was used to achieve this
level of speed and precision.
18
15 –IN D
+IN B 5
20 19
NC 5
00302-002
GENERAL DESCRIPTION
–IN A 2
1
+IN A 4
16 OUT D
+IN A 3
2
–IN D
–IN A
3
OUT A 1
OUT A
Figure 1. 14-Lead CERDIP (Y Suffix) and 14-Lead PDIP (P Suffix)
APPLICATIONS
High speed image display drivers
High frequency active filters
Fast instrumentation amplifiers
High speed detectors
Integrators
Photo diode preamps
00302-001
FEATURES
Figure 4. Simplified Schematic
The OP467 is specified for operation from ±5 V to ±15 V over
the extended industrial temperature range (−40°C to +85°C)
and is available in a 14-lead PDIP, a 14-lead CERDIP, a 16-lead
SOIC, and a 20-terminal LCC.
Contact your local sales office for the MIL-STD-883 data sheet
and availability.
Rev.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©
3–20 Analog Devices, Inc. All rights reserved.
