The Interconnect Solution Source
1
• ROW
Connectors
PC Card to
Cable to
Board:
Cable to Cable
WT-WT
Examples:
RIGHT-ANGLE PLUG:
STRAIGHT PLUG:
RECEPTACLE:
PLUG
RECEPTACLE
SERIES
WT
WT
= 1-row, straight-plug
= 1-row, right-angle, plug
WT
WT
= 1-row, straight, receptacle
= 1-row, right-angle, receptacle
NUMBER OF CONTACTS
3 through 22
3 through 22
TYPE OF CONTACTS
PC
PD7
PD9
PD11
PF3
PF6
PRD4
PRD7
PRD8
PW40
= Pin, straight, solder cup
= Pin, straight, dip solder, .109
= Pin, straight, dip solder, .140
= Pin, straight, dip solder, .172
= Pin, straight, flex-circuit, .050
= Pin, straight, flex-circuit, .093
= Pin, right-angle, dip solder, .063
= Pin, right-angle, dip solder, .109
= Pin, right-angle, dip solder, .125
= Pin, straight, wire wrap, .625
SAC
SAD7
SAD9
SAD11
SAD15
SAF3
SAF6
SAP
SAR4
SAR7
SAR9
SARC
SAW40
= Socket, straight, solder cup
= Socket, straight, dip solder, .109
= Socket, straight, dip solder, .140
= Socket, straight, dip solder, .172
= Socket, straight, dip solder, .234
= Socket, straight, flex-circuit, .050
= Socket, straight, flex-circuit, .093
= Socket, straight, pin termination, .150, connector saver
= Socket, right-angle, dip solder, .062
= Socket, right-angle, dip solder, .109
= Socket, right-angle, dip solder, .140
= Socket, right-angle, solder cup
= Socket, straight, wire wrap, .625
TYPE OF HARDWARE
No hardware for this series.
Omit any hardware code letters.
OPTIONS
• The thin outboard barriers are often removed at the factory due to their fragile nature.
• OPTION CODES: Add to the end of the part number. Example: WT10PC443-1 Call factory for additional codes.
-443: Polarized Pin installed in contact position noted by dash number. See “Polarization” under next tab.
-444: Contact position noted by dash number is left open (to mate with -443). See “Polarization” under next tab.
-B82: Termination face sealed against conformal coating.
-CD:
Cross drilled connectors for hold down screws. See page W-8.
-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
-D54: Combine B82 and D01 special codes.
-G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate.
“W” Series Connectors
W-6
9916
Airborn, Inc. • 4321 Airborn Drive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
WT
WT
WT
8
8
8
PRD7
PD9
SAC
