•
RATINGS
Resistance Range And Tolerance
Type
(Size)
RMC 16S, 16, 10, 18, 14, 12, 01
Rated Maximum
Power Working
@ 70°C Voltage
W
V
RMC 16S
(0402)
suitable for a wide range of soldering methods and are ideal
for use with high-speed automatic insertion machinery. They
are best suited for commercial, industrial and automotive applications.
0.063
50
0.063
50
300
200
400
RMC 10
0.10
(0805)
RMC 18
(1206)
FEATURES
1. A wide range of values and power ratings for design
flexibility.
3. Thick film Ruthenium Oxide element for excellent
stability.
2. Excellent solderability for all soldering methods due
to superior termination composition/construction.
4. Operating temperatures range from -55 to 125°C.
•
0.125
0.125
0.25
RMC 14
(1210)
0.25
200
400
RMC 12
(2010)
0.50
200
400
200
400
RMC 01
(2512)
DIMENSIONS AND STRUCTURE
•
Resistance is marked on 0603 and larger sizes by three
digits for 2% and 5% tolerances. 0805 and larger components are marked with four digits for 1% tolerance.
1.0
± 2% (G)
E24 Series
± 5% (J)
E24 Series
—
—
10 Ω to 1 MΩ 10 Ω to 5.6 MΩ
—
1 Ω to 9.1 Ω
—
—
10 Ω to 1 MΩ 10 Ω to 10 MΩ
—
1 Ω to 9.1 Ω
—
—
10 Ω to 10 MΩ 10 Ω to 22 MΩ
1 Ω to 9.1 Ω
1 Ω to 9.1 Ω
—
—
10 Ω to 10 MΩ 10 Ω to 22 MΩ
1 Ω to 9.1 Ω
1 Ω to 9.1 Ω
—
—
10 Ω to 1 MΩ 10 Ω to 20 MΩ
—
1 Ω to 9.1 Ω
—
—
10 Ω to 1 MΩ 10 Ω to 20 MΩ
—
1 Ω to 9.1 Ω
—
—
10 Ω to 1 MΩ 10 Ω to 20 MΩ
—
1 Ω to 9.1 Ω
1) T.C.R. less
than 100 ppm
and resistance
tolerances less
than 1% available in RGC and
RNC series.
2) Resistance
values less than
1.0 Ω available
in RLC series.
3) For use as
jumper, RMC
16S and RMC 16
rated at 1.0 amp
maximum, all
others 2 amps
maximum.
Maximum DCR
of 50 mΩ.
4) RMC 10 can be
operated up to
1/8 watt @ 70°C
and RMC 18 can
be operated up
to 1/4 watt @
70°C provided
the surface temperature of the
resistor does not
exceed 125°C.
PERFORMANCE CHARACTERISTICS
DESCRIPTION
PERFORMANCE
Resistance
Temperature
Coefficient
Outer Electrode: Sn/Pb
± 1% (F)
E96 Series
± 100
100 Ω to 1 MΩ
± 200
10Ω to 97.6Ω
—
+ 500/- 200
± 100
100 Ω to 1 MΩ
± 200
10Ω to 97.6Ω
—
+ 500/- 200
± 100
10 Ω to 1 MΩ
± 200
1.02 MΩ to 10 MΩ
—
+ 500/- 200
± 100
10 Ω to 1 MΩ
± 200
1.02 MΩ to 10 MΩ
+ 500/- 200 1 Ω to 9.76 Ω
± 100
10 Ω to 1 MΩ
—
± 200
—
+ 500/- 200
± 100
10 Ω to 1 MΩ
—
± 200
—
+ 500/- 200
± 100
10 Ω to 1 MΩ
—
± 200
—
+ 500/- 200
100
150
Resistance
Temp.
Coefficient
ppm/°C
100
RMC 16
(0603)
Rugged and easy to use, Kamaya thick film chip resistors are
•
Maximum
Overload
Voltage
V
TEST METHOD JIS C5202
As specified in table
section 5.2
Measuring temperature +25°C/-55°C/+25°C/+125°C
Short-time Overload
Inner Electrode: Ag/Pd
section 5.5
Rated voltage x2.5, 5 seconds
± 1.0% maximum
section 6.1.4
Install a sample on the board and bend board 5/45mm
for 10 seconds (1/2 and 1 are 3/45mm)
Solder-Heat Resistance
Middle Electrode: Ni
± 1.0% maximum
Terminal Strength
± 1.0% maximum
section 6.10
Dip into 260°C solder bath for 10 seconds
section 6.11
After dipping into flux dip into 235°C solder bath
for 2 seconds
Solderability
Type
(Size)
RMC 16S
(0402)
RMC 16
(0603)
RMC 10
(0805)
RMC 18
(1206)
RMC 14
(1210)
RMC 12
(2010)
RMC 01
(2512)
1.0 ± 0.05
0.5 ± 0.05
0.35 ± 0.05
0.20 ± 0.1
0.25 ± 0.05
0.1
0.6 mg
1.6 ± 0.1
0.8 ± 0.1
0.05
0.45 ± 0.1
0.3 ± 0.1
0.3 ± 0.1
2 mg
2.0 ± 0.1
1.25 ± 0.1
0.55 ± 0.1
0.4 ± 0.2
0.4 ± 0.2
5 mg
3.2 ± 0.15
1.6 ± 0.15
0.55 ± 0.1
0.5 ± 0.25
0.5 ± 0.25
9 mg
3.2 ± 0.15
2.5 ± 0.15
0.55 ±0.15
0.5 ± 0.25
0.5 ± 0.25
16 mg
5.0 ± 0.15
2.5 ± 0.15
0.55 ± 0.15
0.6 ± 0.2
0.6 ± 0.2
25 mg
6.3 ± 0.15
3.2 ± 0.15
0.55 ± 0.15
0.6 ± 0.2
0.6 ± 0.2
40 mg
Dimension
L
W
H
1
2
Unit Weight
4
Kamaya Inc. • Phone: 219-489-1533 • Fax: 219-489-2261 • www.kamaya.com
± 1.0% maximum
section 7.4
Cycle between -55°C and + 125°C for 5 cycles
Load Life in Moisture
± 2.0% maximum
section 7.9
Rated voltage 1.5 hours ”ON” 0.5 hours ”OFF” 40°C
95%RH 1,000 Hours
Load Life
Unit = mm
95% minimum coverage
Temperature Cycle
± 2.0% maximum
section 7.10
Rated voltage 1.5 hours ”ON” 0.5 hours ”OFF” 70°C.
1,000 Hours
•
PART NUMBER SYSTEM
RMC
Product Type
RMC = Thick Film
Chip Resistor
10
Wattage (size)
16S = 1/16 watt (0402)
16 = 1/16 watt (0603)
10 = 1/10 watt (0805)
18 = 1/8 watt (1206)
14 = 1/4 watt (1210)
12 = 1/2 watt (2010)
01 = 1.0 watt (2512)
-
XXX or XXXX
Resistance Value
2 significant digits plus multiplier
102 = 1.0 KΩ
1R0 = 1.0 Ω
"000" for jumper
J
Tolerance
F = ± 1%
G = ± 2%
J = ± 5%
3 significant digits plus multiplier for 1% tolerance
1002 = 10.0 KΩ
10R0 = 10.0 Ω
T
Packaging
B = Bulk
T = Tape and Reel (paper)
TP = Tape and Reel (plastic)
TH = Tape and Reel (paper,
2 mm pitch) (0402)
BA = Bulk Cartridge
Kamaya Inc. • Phone: 219-489-1533 • Fax: 219-489-2261 • www.kamaya.com
5
