DATA SHEET
PIN Diode Chips Supplied on Film Frame
Applications
Switches
Attenuators
Features
Preferred device for module applications
PIN diodes supplied are 100% tested, saw cut, and mounted on
film frame
Low cost
Skyworks GreenTM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of GreenTM, document number
SQ04–0074.
Description
The PIN diodes that comprise this family of diodes supplied on
film frames are designed for high-volume applications from
10 MHz to over 3 GHz. This family contains three groups of PIN
diodes:
1. Low-capacitance, low-resistance PIN diodes designed primarily
for RF switching applications:
SMP1320-099
SMP1321-099
SMP1322-099
SMP1340-099
2. PIN diodes with mid-range I-layers and resistance designed for
either RF switching or attenuator applications:
SMP1302-099
SMP1331-099
SMP1353-099
3. PIN diodes with thick I-layers designed for low-distortion RF
variable attenuator applications:
SMP1304-099
SMP1307-099
These PIN diodes are provided as 100 percent tested, diced
wafers mounted on film frames for optimal compatibility with
high-volume pick-and-place assembly techniques.
Absolute maximum ratings are provided in Table 1. Electrical
specifications are provided in Table 2. Chip dimensions are shown
in Table 3. Typical performance characteristics are illustrated in
Figures 1 through 5. Figure 6 describes the wafer film frame.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200140M • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 24, 2016
1
