SP8861
1·3GHz Low Power Single-Chip Frequency Synthesiser
LOCK DETECT
1
28
27 26
25
PD2 OUTPUT
POWER DOWN
6
24
RPD
VEE4
7
23
VCC3
VCC4
8
22
GROUND
VCC1
9
21
XTAL 1
RF INPUT
10
20
XTAL2
RF INPUT
11
19
VEE2
16
17 18
20·3V to 17V
255°C to 1150°C
240°C to 185°C
2·5V p-p
NC
VCC2
15
ENABLE
14
DATA
VEE1
13
CLOCK
SP8861
HP28
*FPD and FREF outputs are reversed by the phase
detector sense bit in the F1/F2 programming word. The
above diagram is correct when the sense bit is low. See
Table 2 and Fig. 7.
VCC1, VEE1 – preamplifier and prescaler supplies
VCC2, VEE2 – oscillator supplies
VCC3, VEE3 – charge pump 2 supplies
VCC4, VEE4 – ECL supplies
Fig. 1 Pin identification diagram (top view)
ABSOLUTE MAXIMUM RATINGS
Supply voltage
Storage temperature
Operating temperature
Prescaler input voltage
NC
Cd
2
5
12
FEATURES
s Improved Digital Phase Detector Eliminates
‘Dead Band’ Effects
s Low Operating Power, Typically 175mW
s 1·3GHz Operating Frequency
s Complete Phase Locked Loop
s High Input Sensitivity
s Programmed throughThree-Wire Bus
s Wide Range of Reference Division Ratios
s Local Storage for Two Frequency Words, giving
Rapid Frequency Toggling
s Programmable Phase Detector Gain
s Power Down Mode
VEE3
3
IC
PD1 OUTPUT
4
FREF*
F1/F2
The SP8861 is a low power single chip synthesiser
intended for professional radio applications, containing all the
elements (apart from the loop amplifier) required to build a PLL
frequency synthesis loop
The device is serially programmable by a three-wire data
highway and contains three independent buffers to store one
reference divider word and two local oscillator divider words.
A digital phase detector with two charge pumps,
programmable in phase and gain, are provided to improve
lock-up performance. The preset operation of the charge
pumps can be overwritten or the comparison frequencies
switched to output ports under control of the divider word. The
dual modulus ratio and so operating range is also
programmable through the same word.
A power down mode is incorporated as a battery economy
feature.
DS3640 - 4.0 April 1998
FPD*
Supersedes version in the1996 Professional Products IC Handbook, HB2480 - 3.0
ORDERING INFORMATION
SP8861/NA/HP
