SaRonix
Crystal Clock Oscillator
3.3 & 5V, HCMOS, ACMOS, TTL, SMD
Technical Data
ST410H Series
Frequency Range:
32 MHz to 125 MHz
Frequency Stability:
±50 or ±100 ppm over all conditions of operating
temperature, rated (input) supply voltage changes, load
changes, calibration tolerance, aging*, shock and vibration.
* 1 year @ +40°C Average Ambient Operating Temperature
Temperature Range:
Operating:
Storage:
Supply Voltage:
Recommended Operating:
+5V ±10% or 3.3V ±10%
Supply Current:
ACTUAL SIZE
0 to +70°C or -40 to +85°C
-55 to +125°C
65mA max, 50mA typ @ 5V, 35mA max @ 3.3V
Output Drive:
Symmetry:
Description
A crystal controlled, low-current oscillator providing precise rise and fall times
to drive TTL compatible or HCMOS/
ACMOS loads. The tri-state function
enables the output to go high impedance.
Comes in industry standard plastic SMD
package.
Applications & Features
• Suited for use with new HCMOS/
ACMOS MPU's, Fiber Channel and
Gigabit Ethernet applications
• Broad frequency range 32 MHz to
125 MHz
• 3.3 or 5V version
• Matches EIA standard SO-J-20
footprint
• High Drive ACMOS and HCMOS capability
• Tri-State output standard
• Short circuit protected output
• Also available in full & half-size
ST4100 Metal Series, see separate data
sheet
• See ST410R Series for same size equivalent substitute in more economical FR4
package
• Available on tape & reel; 24mm tape,
1000pcs per reel
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Period Jitter RMS:
45/55% (32 to 125MHz, 0 to +70°C)
45/55% (32 to 60MHz, -40 to +85°C)
45/55% (60+ to 125MHz, -40 to +85°C, 3.3V)
40/60% (60+ to 125MHz, -40 to +85°C, 5V)
2ns max 20% to 80% VDD (ACMOS); 1.5ns max 0.5 to 2.5V (TTL)
10% VDD max (5V); 20% VDD max (3.3V)
80% VDD min
50Ω ACMOS (5V); 95Ω ACMOS (3.3V)
13ps max 32 to 72 MHz
20ps max 72+ to 125 MHz, 0 to +70°C
25ps max 72+ to 125 MHz, -40 to +85°C
Tri-State Control Characteristics:
Oscillation (Pin 3):
VIN ≥2.2V or Open (Pin 1)
High Impedance (Pin 3):
VIN ≤0.8V or GND (Pin 1)
Internal Pullup Resistance:
50kΩ min
Disable Output Delay:
100nsec max
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
Environmental:
Thermal Shock:
Moisture Resistance:
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-833, Method 2004, Condition B2
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition I or J
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Part Numbering Guide
ST41 3 H B – 125.0000 (T)
(T)
= Tape & Reel
full reel increments only
Blank = Bulk packaged
Series
Type
3 = 3.3V ACMOS
5 = 5V TTL
6 = 5V ACMOS
Frequency
Package Style
H = Plastic SMD
Stability Tolerance
B = ±50 ppm, 0 to +70°C
C = ±100 ppm, 0 to +70°C
F = ±100 ppm, -40 to +85°C
DS-184
SaRonix
REV D
141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
www.saronix.com
