TCP™ Series
TCP1.25A, Telecom Circuit Protector
Description
• The first and most reliable surface mount telecom circuit
protector designed to protect against power cross faults
and comply with all surge requirements.
• Allows compliance with telecom regulatory standards
including Bellcore GR 1089, UL 1950/60950, and FCC part
68. Application circuit testing is recommended.
• Eliminates the need for a current limiting resistor.
• Protects against overcurrent conditions found in telecom
Subscriber Line Interface Cards (SLICs), xDSL Modem
Applications, Set-Top Boxes, and Consumer Premises
Equipment (CPE).
• TCP1.25A tested and confirmed compatible with
STMicroelectronics Trisil™ Transient Surge Arrestor
(list of part numbers below)
RoHS
2002/95/EC
Dimensions
⁄(inches)
mm
STMicroelectronics Trisil™ P/N’s
SMP100LC-XXX
SMP100MC-XXX
ELECTRICAL CHARACTERISTICS
% of Amp Rating
Opening Time
100%
4 Hours Minimum
250%
1 Second Minimum
250%
4-10 Seconds Typical
250%*
120 Seconds Maximum
300%
10 Seconds Maximum
Land Pattern
5.2
3.7
(0.204)
(0.145)
4.0
(0.157)
* If the device does not open at 250% within 120 seconds, increase
current to 300% of amp rating. Device must open in 10 seconds max.
Environmental Data
• Life Test: MIL-STD-202, Method 108A, Test Condition D
• Load Humidity: MIL-STD-202, Method 103B
• Moisture Resistance: MIL-STD-202, Method 106E
• Thermal Shock: MIL-STD-202, Method 107D, air-to-air
• Case Resistance: EIA/IS-722
• Resistance to Dissolution of Metallization:
ANSI J-STD-002, Test D
• Mechanical Shock: MIL-STD-202, Method 213B, Test
Condition A
• High Frequency Vibration: MIL-STD-202, Method 204D,
Test Condition D
• Resistance to Solvents: MIL-STD-202, Method 215A
12.6
(0.496)
Agency Information
• UL Recognition Card: JDYX2/E19180
• CSA Component Certification Record and Class No.:
053787C000, 1422 30
Ordering
• Specify packaging, product and option code
(i.e., TR2/TCP1.25-R)
Soldering Method
• Wave Immersion: 260°C, 10 sec max.
• Infrared: 260°C, 30 sec max.
LIGHTNING SURGE SPECIFICATIONS
Surge Specification
Surge
FCC 47 Part 68
FCC 47 Part 68
Bellcore GR-1089-CORE
Bellcore GR-1089-CORE
Surge out
Surge out
Longitudinal Type A
Metallic Type B
First Level Lightning
First Level Lightning
Repetitions
Waveform
(µSec.)
Current (A)
Voltage (V)
Performance
Requirement
2
2
50
50
1
1
10x160
10x560
10x1000
2x10
10x160
10x560
100 per fuse
100
100
500
160
115
1500
800
1000
2500
N/A
N/A
Fuse cannot open
Fuse cannot open
Fuse cannot open
Fuse cannot open
Fuse cannot open
Fuse cannot open
ELECTRICAL AND POWER CROSS SPECIFICATIONS
Product
Code
TCP1.25A
Voltage
Rating
AC
250 V
Interrupting
Rating*
250VAC 600VAC
50 A
60 A
DC Cold
Resistance** (ohms)
min. typ. max.
0.070 0.090 0.110
Typical
Melting
I2t†
22.2 A2s
Maximum
Total
Clearing
100 A2s
Typical
Voltage
Drop‡
150mV
* AC Interrupting Rating (Measured at designated voltage, 100% power factor)
** DC Cold Resistance (Measured at 10% of rated current)
*** On RoHS Compliant Version (-R option)
† Typical Melting I2t (Measured with a battery bank at 60V DC, 10x-rated current, time constant of calibrated circuit less than 50 microseconds)
‡ Typical Voltage Drop (Measured at rated current after temperature stabilizes)
Alpha Code
Marking
1st Code 2nd Code
J
R***