The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.54mm Pitch Board to Board Connector
HIF3H Series
sFeatures
1. Product Variation
Afford to connect the board to board horizontally or vertically.
2. Compatibility
Achieve combination with other HIF3H series.
sApplications
Computers, termination equipment, various kinds of electronic equipment, Office Automation machines and so on
sProduct Specifications
Rating
Current rating: 2A
Operating Temperature Range: -30 to +85ç (Note 1)
Voltage rating: 300V AC Operating Humidity Range: 40 to 80%
Item
Storage Temperature Range: -10 to +60ç(Note 2)
Operating Humidity Range: 40 to 70% (Note 2)
Specification
Condition
1. Insulation Resistance
1000M ohms
500V DC
2. Withstanding Voltage
No flashover or insulation breakdown.
1000V AC/1 minute.
3. Contact Resistance
15m ohms max.
Measured at 0.1A
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Insulation resistance: 10M ohms min.
6. Temperature Cycle
96 hours at temperature of 40ç and humidity of 90% to 95%
( -65ç: 30 minutes¡15 to 35ç: 5 minutes max.¡
(125ç: 30 minutes¡15 to 35ç: 5 minutes max.) 5 cycles
No damage, cracks, or parts looseness.
7. Durability (Mating/un-mating) Contact resistance: 15 m ohms max.
500 cycles
8. Resistance to Soldering heat No deformation of components affecting performance.
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Parts
Material
Receptacle Contact
DS
Remarks
PBT
Insulator
Finish
Black
UL94V-0
Phosphor bronze
Selective gold plated
DSA
Pin header
A110
–––––––
Brass or phosphor bronze
Selective gold plated