S2S2R Pin Diode Switch
Single Pole, Two Throw
Reflective
Features:
•
Incorporated TTL-compatible driver for
convenient system integration and operates
from +5 V and -15 V DC power supplies.
•
DC blocks at all RF ports.
•
Ruggedized construction.
•
RoHS-compliant versions available.
•
Hermetic versions available.
Specifications:
Parameter
Specification
Units
2– 6
GHz
Insertion Loss (max)
1.4
dB
VSWR (max) 50 ohms
1.7
ratio
Isolation (min)
70
dB
100
nsec
1
W
Frequency Range
Switching Speed (max)
CW RF Power, Operating (max)
Notes:
Mechanical Specifications:
DC Bias:
(Standard)
+5 V +/- 0.5 V @ 80 mA max
-15 V +/- 3 V @ 50 mA max
DC Bias:
(-5 option)
+5 V +/- 0.5 V @ 100 mA max
-5 V +/- 0.5 V @ 60 mA max
DC Bias:
(-12 option)
+15 V +/- 3 V @ 80 mA max
-15 V +/- 3 V @ 50 mA max
Control:
TTL 0 = Low Loss
TTL 1 = Isolation
Single Bit Control:
(-1 option)
E1=0: J2 – J1 Low Loss,
J3 – J1 Isolation
E1=1: J3 – J1 Low Loss,
J2 – J1 Isolation
Environmental Specifications:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp:
-55 °C to +85 °C
Storage Temp:
-65 °C to +125 °C
Humidity:
MIL-STD-202F, M103, Cond B
Shock:
MIL-STD-202F, M213, Cond B
Altitude:
MIL-STD-202F, M105, Cond B
Vibration:
MIL-STD-202F, M204, Cond B
Thermal Shock:
MIL-STD-202F, M107, Cond A
Temperature Cycle:
MIL-STD-202F, M105C, Cond D
SIGNAL & CONTROL SOLUTIONS
S2-1 Outline (Single bit control)
Finish:
Gold Plate per MIL-G-45204
Chem film per MIL-C-5541
ø0.02” x 0.15” long
Weight:
20 g max
Mounting:
ø0.10” through holes
(4) places
Screening:
Switching speed is defined as 50% TTL to 90% RF (t-on) and 50%
TTL to 10% RF (t-off).
Revision Date: 2/9/2014
S2 Outline (Two bit control)
Bias & Control Pins:
E1 controls J2 – J1
E2 controls J3 – J1
Case Styles:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65 °C to +100 °C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked per
MIL-STD-883, Method 1014.
Optional High-Rel screening available upon request. Contact the
factory to discuss your screening requirements.
40 Industrial Way East, Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212, Fax: (732) 460-0214
www.aeroflex.com/ASCS, email: ascs-sales@aeroflex.com