483-01, 483-02, and 483-03
THREE PHASE 25 AMP
RECTIFIER BRIDGES
SCOTTSDALE DIVISION
APPEARANCE
This series of high-current three-phase bridge rectifiers are constructed with
hermetically sealed rectifiers with the same design and construction as used in
military applications for the utmost in reliability. They can also be optionally obtained
with formal military screened diodes that have been subjected to 100% screening and
military qualified to MIL-PRF-19500/483 that are ideal for high-reliability applications
where a failure cannot be tolerated. These industry-recognized 25 Amp rated rectifier
bridges with working peak reverse voltage selections for 200, 400, and 600 volts for
each leg use diodes that are hermetically sealed with voidless-glass construction
using an internal “Category I” metallurgical bond. Microsemi also offers numerous
other rectifier products to meet higher and lower current ratings with various recovery
time speed requirements including fast and ultrafast device types in both through-hole
and surface mount packages.
WWW . Microsemi .C OM
DESCRIPTION
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
•
•
•
•
•
•
APPLICATIONS / BENEFITS
•
•
•
•
•
•
•
Voidless hermetically sealed glass packages used
internally for each leg
Triple-layer passivation
Internal “Category I” Metallurgical bonds
JANTX available per MIL-PRF-19500/483
Controlled Avalanche Characteristics
Surge ratings of 150 Amps
MicroNote 050
MAXIMUM RATINGS
•
•
•
•
•
o
Conversion of three phase ac to dc current flow
Working Peak Reverse Voltages 200 to 600 V
Military and other high-reliability applications
High forward surge current capability
Low thermal resistance
Extremely robust construction
Inherently radiation hard as described in Microsemi
MECHANICAL AND PACKAGING
o
•
Junction Temperature: -65 C to +175 C
Storage Temperature: -65oC to +150oC
Maximum Avg Output Current: 25 Amps @ TC = 55°C
and 18.5 Amps @ TC = 100°C. Derate @ 144 mA / oC
between 55°C and 100°C. Derate @ 370 mA/ oC
above 100°C.
Non-repetitive Forward Surge Current (8.3 ms half
sine): 150 Amps @ TC = 55°C
o
Solder temperatures (terminals): 260 C for 10 s
(maximum)
•
•
•
•
•
CASE: Epoxy filled case with hermetically sealed
void-less hard glass rectifiers with Tungsten slugs
TERMINALS: Nickel plated brass with optional hot
Tin-Lead solder dip
MARKING: Part number on one side of case
POLARITY: Marked on body adjacent to terminals
(see terminal polarity marking on last page)
WEIGHT: 32 grams
See package dimensions on last page
ELECTRICAL CHARACTERISTICS
TYPE
WORKING
PEAK
REVERSE
VOLTAGE
VRWM
VOLTS
220
440
660
VOLTS
483-01
483-02
483-03
NOTE 1:
NOTE 2:
NOTE 3:
NOTE 4:
AVERAGE
RECTIFIED
CURRENT
IO1 @
MAXIMUM REVERSE
CURRENT PER LEG
IR @ VRWM
Note 1
200
400
600
AVERAGE
RECTIFIED
CURRENT
IO2 @
o
TC=+100 C
Note 2
TC = 25°C
AMPS
25
25
25
AMPS
6
6
6
μA
1
1
1
TC=+55oC
REVERSE
RECOVERY
trr
Note 3
TC = 100°C
FORWARD
VOLTAGE
VF @ 30.0 A
(pk) @ 8.3 ms
Duty Cycle
≤ 2%
μA
200
200
200
Volts
1.3
1.3
1.3
μs
2.5
2.5
2.5
Rated at TC = 55ºC with reference to metal case. Derate linearly at 144 mA/ºC between TC = 55ºC and TC = 100ºC
Derate linearly at 370 mA/ºC above TC = 100ºC.
IF = 0.5 A, IRM = 1.0 A, IR(REC) = .250 A
Point at which TC is referenced shall be in metal part of case as shown in drawing on last page.
Copyright © 2009
11-10-09 Rev C; 483-1.pdf
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
483-01, 483-02, 483-03
MINIMUM
BREAKDOWN
VOLTAGE
Per Leg
VBR
@50μA