SX Series
Polystyrene-Foil / Axial Leads
{ Axial Leads
{ High Q and Excellent Stability
{ High Insulation, Low Absorption
{ Low Dissipation Factor,
Tight Temperature Coefficient
{ Lead Material
Solder Coated or Tinned
Solid Wire
SPECIFICATIONS
Operating Temperature:
-40g C to +70g C
(Derate 0.67% per gC
above 40g C)
Voltage Range:
40g C - 33 VDC to 630 VDC
70g C - 25 VDC to 500 VDC
Capacitance Range:
20 pF to .027 ȐF
Specifications
For 33 VDC:
Insulation Resistance (IR)
Shall be less than:
50,000 M⏲ or 1000/C (M⏲) (C in MFD) whichever is
lower for 33 VDC at 10 VDC
100,000 M⏲ or 2000/C (M⏲) (C in MFD) whichever is
lower for 63 VDC at 10 VDC
-125 ȗ 75 PPM/gC
For 63, 160, 630 VDC
Capacitance Values ͨ 500 pF
Capacitance Values > 500 pF
Dissipation Factor (DF):
Shall not be .05%
Ideally suited for precision
circuits such as sample and
hold, dual Slope Integration
and Temperature Compensation
Tolerance Range:
ȗ2.5%, ȗ5.0%, ȗ10.0%
Temperature Coefficient
Dielectric Withstand Voltage:
2.5 x Rated Voltage for 5 seconds
Charge and discharge
current ͨ 50 mA
-175 ȗ 75 PPM/gC
-125 ȗ 75 PPM/gC
500,000 M⏲ or 10,000/C (M⏲) (C in MFD) whichever is
lower for 160 to 630 VDC at 100 VDC
Dielectric Absorbtion:
Equal to or less than .02%
Capacitance Drift:
Equal to or less than ȗ 0.3% + 0.4 pF after thermal cycle
from +25gC to -25gC to +70gC and back to +25gC
Outline Dimensions
Storage:
ͬC/C ͨ ȗ 0.5% +.4pF for SXK, SXL
ͬC/C ͨ ȗ 0.2% +.4pF for SXM, SX
When stored in constant climate ͨ 70% RH within operating temperature
range and stabilized at 40% RH 25gC ± 5gC for 24 hours before measurements
1.180"
Min
D
Max
L
Max
ɂd
Life Test:
125% of rated voltage for 250 hrs at 70gC
Soldering Conditions:
Not recommended for wave soldering
For manual soldering:
Solder Temperature: 270gC
Time: 4 seconds maximum
Distance from body: .236 inches minimum
Caution:
Exposure to temperatures 70gC will result in serious degradation
Clean with de-ionized water only. Do not expose to solvents.
Mallory Products for CDE/6325 Digital Way/Indianapolis IN 46278/Phone: (317)275-2285/Fax: (317)275-2293/www.cornell-dubilier.com
205
Film Capacitors
Total Self Inductance:
Body: 10 to 30 nH, function of
the body length
Leads: 10 nH/cm of length
.GENERAL
