Alternative Device Available
SFH610A, SFH6106
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
FEATURES
SFH610A
1
4
E
C 2
3
C
A
• Good CTR linearity depending on forward
current
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 70 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
SFH6106
A 1
4 E
• Lead (Pb)-free component
C 2
3 C
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
i179056
DESCRIPTION
The SFH610A (DIP) and SFH6106 (SMD) feature a high
current transfer ratio, low coupling capacitance and high
isolation voltage. These couplers have a GaAs infrared
diode emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a plastic
DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6. This version complies with
IEC 60950 (DIN VDE 0805) for reinforced insulation up to
an operation voltage of 400 VRMS or DC. Specifications
subject to change.
AGENCY APPROVALS
• UL1577, file no. E52744 system code H or J, double
protection
• DIN EN 60747-5-5 (VDE 0884) available with option 1
• CSA 93751
• BSI IEC 60950; IEC 60065
ORDERING INFORMATION
PART
SFH610A-1
SFH610A-2
SFH610A-3
SFH610A-4
SFH610A-5
SFH6106-1
SFH6106-2
SFH6106-3
SFH6106-4
SFH6106-5T
SFH610A-1X006
SFH610A-1X018T
SFH610A-2X006
SFH610A-3X006
SFH610A-3X007
SFH610A-4X006
REMARKS
CTR 40 % to 80 %, DIP-4
CTR 63 % to 125 %, DIP-4
CTR 100 % to 200 %, DIP-4
CTR 160 % to 320 %, DIP-4
CTR 250 % to 500 %, DIP-4
CTR 40 % to 80 %, SMD-4
CTR 63 % to 125 %, SMD-4
CTR 100 % to 200 %, SMD-4
CTR 160 % to 320 %, SMD-4
CTR 250 % to 500 %, SMD-4, tape and reel
CTR 40 % to 80 %, DIP-4 400 mil
CTR 40 % to 80 %, SMD-4 400 mil, wide leadspread
CTR 63 % to 125 %, DIP-4 400 mil
CTR 100 % to 200 %, DIP-4 400 mil
CTR 100 % to 200 %, SMD-4
CTR 160 % to 320 %, DIP-4 400 mil
Note
• For additional information on the available options refer to option information.
Rev. 2.2, 23-May-13
Document Number: 83666
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000