Agilent HDLX-2416 Series
Four Character 5.0 mm (0.2 inch)
Smart 5 x 7 Alphanumeric Displays
Data Sheet
Description
These are 5.0 mm (0.2 inch) four
character 5 x 7 dot matrix
displays driven by an on-board
CMOS IC. These displays are pin
for pin compatible with the
HPDL-2416. The IC stores and
decodes 7 bit ASCII data and
displays it using a 5 x 7 font.
Multiplexing circuitry, and
drivers are also part of the IC.
The IC has fast setup and hold
times which makes it easy to
interface to a microprocessor.
Absolute Maximum Ratings
Supply Voltage, VDD to Ground[1]
Input Voltage, Any Pin to Ground
Free Air Operating Temperature Range, TA
Storage Temperature, TS
CMOS IC Junction Temperature, TJ (IC)
Relative Humidity (non-condensing) at 65°C
Soldering Temperature [1.59 mm (0.063 in.) Below Body]
Solder Dipping
Wave Soldering
ESD Protection, R = 1.5 kΩ, C = 100 pF
-0.5 V to 7.0 V
-0.5 V to VDD + 0.5 V
-40°C to +85°C
-40°C to 100°C
+150°C
85%
Features
• Enhanced drop-in replacement to
HPDL-2416
• Smart alphanumeric display
Built-in RAM, ASCII decoder, and
LED drive circuitry
• CMOS IC for low power
consumption
• Software controlled dimming
levels and blank
• 128 ASCII character set
• End-stackable
• Categorized for luminous
intensity; Yellow and Green
categorized for color
• Low power and sunlight viewable
AlGaAs versions
• Wide operating temperature range
-40°C to +85°C
• Excellent ESD protection
• Wide viewing angle (50° typ.)
260°C for 5 secs
250°C for 3 secs
VZ = 2 kV (each pin)
Note:
1. Maximum Voltage is with no LEDs illuminated.
Devices:
Standard Red
HDLR-2416
AlGaAs Red
HDLS-2416
HDLU-2416
High Efficiency Red
HDLO-2416
Orange
HDLA-2416
Yellow
HDLY-2416
Green
HDLG-2416
ESD WARNING: Standard CMOS handling precautions should be observed with the HDLX-2416.