Loose
R.46
X2 CLASS (IEC 60384-14) - MKP Series
Taped
Fig.1
metallized polyPROPYLENE film capacitor
SELF-HEALING PROPERTIES
Fig.2
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRODUCT CODE: R46
Insulated rigid leads
Insulated flexible leads 0.5mm2
Note: R.46 series has replaced the 1.40 series and 1.47 series.
For new design we suggest the use of the R.46 series.
Pitch Box thickness (B)
(mm)
(mm)
Ø d ±0.05
p ≤15
22.5 ≤ p ≤ 27.5
0.8
10.0
15.0
15.0
22.5
27.5
37.5
p = 37.5
0.6 or 0.8*
1
*See size table.
All dimensions are in mm.
Maximum dimensions (mm)
B max
H max
L max
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
All
<7.5
≥7.5
All
All
All
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
GENERAL TECHNICAL DATA
test method and performance
Dielectric: polypropylene film.
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
Damp heat, steady state:
Plates: metal layer deposited by evaporation under vacuum.
Test conditions 1st
Winding: non-inductive type.
Temperature:
Relative humidity (RH):
Test duration:
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Test conditions 2nd
Temperature:
Relative humidity (RH):
Test duration:
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤5%
Insulation resistance: ≥50% of initial limit.
Operating temperature range: -40 to +110°C
IEC 60384-14, EN 60384-14.
electrical characteristics
Rated voltage (VR):
Capacitance range:
275Vac (50/60Hz) / 560 Vdc
300Vac (50/60Hz) / 630 Vdc
Endurance:
Test conditions
Temperature:
Test duration:
Voltage applied:
0.01µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
≤10 (6)* at 1kHz *
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤10%
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Insulation resistance:
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
Performance
≥1x105 MΩ (5x105 MΩ )*
≥30000 s (150000 s )*
* Typical value
+25°C±5°C
1 min
100 Vdc
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |∆C/C|: ≤2%
Winding scheme
for C≤0.33µF
for C>0.33µF
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
09/2008
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Performance
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M);
tolerance ±5% (J) available upon request
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C:
Typical value
+60°C ± 2°C
95% ±2%
500 hours
Performance
Climatic category: 40/110/56 IEC 60068-1
Related documents:
+40°C ± 2°C
93% ±2%
56 days
single sided metallized
polypropylene film
150
