Catalog 1308242
Issued 3-03
AXICOM
V23079 (P2) series
5 Amp Switching, High Dielectric
DPDT Polarized
FCC Part 68
PC Board Relay
File E48393
File LR45064
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Features
Coil Data @ 23°C
• Surface and through hole mounting types.
• Breakdown voltage between contacts and coil: 1,500Vrms.
• Surge withstand between contacts and coil: 2,500V (Bellcore).
• High capacity contact: 2A @ 30VDC.
• 2 Form C contact arrangement.
• Board space saving, vertical mount (14.6 x 7.2mm surface area).
• Immersion cleanable, plastic sealed case.
• Single and dual coil latching versions available.
• Basic insulation (coil-to-contact) according to EN 60950 / UL 1950.
• Ultrasonic cleaning is not recommended.
Voltage: 3-24V.
Nominal Power: 70mW-140mW, dependent on model. See chart below.
Contact Data @ 23°C
Arrangement: 2 Form C (DPDT) bifurcated contacts.
Material: Gold overlay on silver nickel.
Rating:
Max. Switching Voltage: 250VAC, 220VDC.
Max. Switching Current: 5A.
Max Carrying Current: 2A.
Max Switching Power: 60W, DC; 62.5VA, AC.
Min. Permissible Load: 100µV.
UL/CSA Rating: 1A @ 30VDC; 300mA @ 110VDC;
500mA @ 120VAC; 250mA @ 240VAC.
Expected Mechanical Life: Approx. 100 million ops.
Expected Electrical Life: 50 million ops. @ 10mA, 12V,
10 million ops. @ 100mA, 6V.
1 million ops. @ 1A, 30V,
500,000 ops. @ 500mA, 60V.
200,000 ops. @ 2A, 30V.
Initial Contact Resistance: 50 milliohms @ 10mA, 20mV.
Thermoelectric potential: <10µV.
Operating Range @ 23°C
@ 85°C
Nominal
Must Operate
Max.
Max.
Voltage
Voltage
Voltage
Voltage
(VDC)
(VDC)
(VDC)
(VDC)
Non-Latching, 140mW Nominal Power
3
2.25
6.5
3.4
4.5
3.375
9.8
5.1
5
3.75
10.9
5.7
6
4.50
13.0
6.8
9
6.75
19.6
10.3
12
9.0
26.1
13.8
24
18.0
52.3
27.7
Single Coil Latching, 70mW Nominal Power
3
2.25
9.2
4.8
4.5
3.375
13.8
7.3
5
3.75
15.3
8.1
6
4.5
18.5
9.8
9
6.75
27.7
14.6
12
9.0
37.0
19.6
24
18.0
74.0
39.2
Dual Coil Latching, 140mW Nominal Power
3
2.25
6.5
–
4.5
3.375
9.8
–
5
3.75
10.9
–
6
4.5
13.0
–
9
6.75
19.6
–
12
9.0
26.1
–
24
18.0
52.3
–
Coil
Resistance
@ 23°C
64.3 ± 6
145 ± 15
178 ± 18
257 ± 26
578 ± 58
1,029 ± 103
4,114 ± 411
128 ± 13
289 ± 29
357 ± 36
514 ± 51
1,157 ± 116
2,057 ± 206
8,228 ± 823
64.3 ± 6
145 ± 15
178 ± 18
257 ± 26
578 ± 58
1,029 ± 103
4,114 ± 411
Operate Data @ 23°C
High Frequency Data
Capacitance: Between Open Contacts: 2pF, max.
Between Coil and Contacts: 1.5pF, max.
Between Poles: 1pF, max.
RF Characteristics: Isolation at 100 / 900 MHz: -39.0 db / -20.7 db.
Insertion loss at 100 / 900 MHz: -0.02 db / -0.27 db.
V. S. W. R. at 100 / 900 MHz: 1.04 / 1.40 .
Must Operate Voltage: 75% of nominal or less.
Must Release Voltage: 10% of nominal or more.
Operate Time (at nominal voltage): 3 ms, typ.; 5 ms, max.
Reset Time (at nominal voltage): 3 ms, typ.; 5 ms, max.
Release Time (non-latching w/o diode in parallel): 2 ms, typ.; 4 ms, max.
Release Time (non-latching with diode in parallel): 4 ms, typ.; 6 ms, max.
Bounce Time (at contact close): 1 ms, typ.; 3 ms, max.
Maximum Switching Rate (no load): 50 operations/s.
Initial Dielectric Strength
Between Open Contacts: 1,000Vrms for 1 minute. (1,500Vrms on
request, consult factory for availability).
Between Coil and Contacts: 1,500Vrms for 1 minute. (single coil relay).
Between Poles: 1,000Vrms for 1 minute.
Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 µs):
Between Open Contacts: 2,000V.
Between Coil and Contacts: 2,500V (single coil relay).
Between Poles: 2,500V.
Surge Voltage Resistance per FCC 68 (10 / 160 µs):
Between Open Contacts: 1,500V.
Between Coil and Contacts: 1,500V (single coil relay).
Between Poles: 1,500V.
Initial Insulation Resistance
Between Mutually Insulated Conductors: 109 ohms @ 500VDC.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Environmental Data
Temperature Range: -40°C to +85°C.
Maximum Allowable Coil Temperature: 110°C.
Thermal Resistance: < 165K/W.
Shock, half sinus, 11 ms: Functional: 50g.
Shock, half sinus, 11 ms: Destructive: 150g.
Vibration, 10-1,000 Hz.: Functional: 35g.
Needle Flame Test: Application time 20s, burning time <15s.
Resistance to Soldering Heat: 260°C for 10s.
Mechanical Data
Termination: Through hole or surface mount printed circuit terminals.
Mounting Position: Any.
Enclosure: Immersion cleanable (IP67) plastic case.
Weight: .084 oz. (2.5g) approximately.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
325
Refer to inside back cover.
