MC14528B
Dual Monostable
Multivibrator
The MC14528B is a dual, retriggerable, resettable monostable
multivibrator. It may be triggered from either edge of an input pulse,
and produces an output pulse over a wide range of widths, the duration
of which is determined by the external timing components,
CX and RX.
http://onsemi.com
MARKING
DIAGRAMS
Features
•
•
•
•
•
•
•
Separate Reset Available
Diode Protection on All Inputs
Triggerable from Leading or Trailing Edge Pulse
Supply Voltage Range = 3.0 Vdc to 18 Vdc
Capable of Driving Two Low−power TTL Loads or One Low−power
Schottky TTL Load Over the Rated Temperature Range
This part should only be used in new designs where the pulse width
is < 10 ms
Note: For designs requiring a pulse width > 10 ms, please see
MC14538, which is pin−for−pin compatible
These Devices are Pb−Free and are RoHS Compliant
1
PDIP−16
P SUFFIX
CASE 648
Symbol
Value
−0.5 to +18.0
−0.5 to VDD + 0.5
V
Iin, Iout
± 10
mA
Power Dissipation, per Package
(Note 1)
PD
500
mW
Ambient Temperature Range
TA
−55 to +125
°C
Storage Temperature Range
Tstg
−65 to +150
°C
Lead Temperature
(8−Second Soldering)
TL
260
1
V
Vin, Vout
SOIC−16
D SUFFIX
CASE 751B
Unit
VDD
1
14528BG
AWLYWW
1
MAXIMUM RATINGS (Voltages Referenced to VSS)
Rating
MC14528BCP
AWLYYWWG
°C
DC Supply Voltage Range
Input or Output Voltage Range
(DC or Transient)
Input or Output Current
(DC or Transient) per Pin
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
high−impedance circuit. For proper operation, Vin and Vout should be constrained
to the range VSS v (Vin or Vout) v VDD.
Unused inputs must always be tied to an appropriate logic voltage level
(e.g., either VSS or VDD). Unused outputs must be left open.
© Semiconductor Components Industries, LLC, 2011
June, 2011 − Rev. 7
1
MC14528B
ALYWG
1
SOEIAJ−16
F SUFFIX
CASE 966
A
WL
YY, Y
WW, W
G
1
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
Publication Order Number:
MC14528B/D
