NCN6001
Compact Smart Card
Interface IC
The NCN6001 is an integrated circuit dedicated to the smart card
interface applications. The device handles any type of smart card
through a simple and flexible microcontroller interface. On top of that,
thanks to the built−in chip select pin, several couplers can be
connected in parallel.
The device is particularly suited for low cost, low power
applications, with high extended battery life coming from extremely
low quiescent current.
www.onsemi.com
1
TSSOP−20
DTB SUFFIX
CASE 948E
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
100% Compatible with ISO 7816−3, EMV and GIE−CB Standards
Fully GSM Compliant
Wide Battery Supply Voltage Range: 2.7 < VCC < 5.5 V
Programmable CRD_VCC Supply Handles 1.8 V, 3.0 V or 5.0 V
Card Operation
Programmable Rise and Fall Card Clock Slopes
Programmable Card Clock Divider
Built−in Chip Select Logic Allows Parallel Coupling Operation
ESD Protection on Card Pins (8.0 kV, Human Body Model)
Supports up to 40 MHz Input Clock
Built−in Programmable CRD_CLK Stop Function Handles Run or
Low State
Programmable CRD_CLK Slopes to Cope with Wide Operating
Frequency Range
Fast CRD_VCC Turn−on and Turn−off Sequence
These are Pb−Free Devices
PIN CONNECTIONS
I/O 1
20 CRD_IO
INT 2
19 CRD_RST
CLK_IN 3
18 CRD_DET
MOSI 4
17 CRD_CLK
CLK_SPI 5
16 GND
EN_RPU 6
15 C4/S0
MISO 7
14 C8/S1
CS 8
13 CRD_VCC
VCC 9
12 Lout_H
Lout_L 10
11 PWR_GND
(Top View)
Typical Applications
•
•
•
•
E−Commerce Interface
Automatic Teller Machine (ATM) Smart Card
Point of Sales (POS) System
Pay TV System
MARKING DIAGRAM
20
NCN
6001
ALYWG
G
1
A
L
Y
W
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 32 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
October, 2014 − Rev. 6
1
Publication Order Number:
NCN6001/D