Pre-Production
FM25L256
256Kb FRAM Serial 3V Memory – Extended Temp.
Features
256K bit Ferroelectric Nonvolatile RAM
• Organized as 32,768 x 8 bits
• Unlimited Read/Write Cycles
• 10 Year Data Retention
• NoDelay™ Writes
• Advanced High-Reliability Ferroelectric Process
Write Protection Scheme
• Hardware Protection
• Software Protection
Low Power Consumption
• Low Voltage Operation 3.0V – 3.6V
• 1 µA (typ) Standby Current
Very Fast Serial Peripheral Interface - SPI
• Up to 20 MHz Frequency
• Direct Hardware Replacement for EEPROM
• SPI Mode 0 & 3 (CPOL, CPHA=0,0 & 1,1)
Industry Standard Configurations
• Extended Temperature -25°C to +85°C
• 8-pin SOIC and 8-pin TDFN Packages
• “Green” Packaging Options
Description
Pin Configuration
The FM25L256 is a 256-kilobit nonvolatile memory
employing an advanced ferroelectric process. A
ferroelectric random access memory or FRAM is
nonvolatile and performs reads and writes like a
RAM. It provides reliable data retention for 10 years
while eliminating the complexities, overhead, and
system level reliability problems caused by
EEPROM and other nonvolatile memories.
Unlike serial EEPROMs, the FM25L256 performs
write operations at bus speed. No write delays are
incurred. Data is written to the memory array
immediately after each byte has been transferred to
the device. The next bus cycle may commence
without the need for data polling. In addition, the
product offers virtually unlimited write endurance.
FRAM also exhibits much lower power consumption
than EEPROM.
rn
lte
ive
at
These capabilities make the FM25L256 ideal for
nonvolatile memory applications requiring frequent
or rapid writes or low power operation. Examples
range from data collection, where the number of
write cycles may be critical, to demanding industrial
controls where the long write time of EEPROM can
cause data loss.
A
The FM25L256 provides substantial benefits to users
of serial EEPROM as a hardware drop-in
replacement. The FM25L256 uses the high-speed SPI
bus, which enhances the high-speed write capability
of FRAM technology. Device specifications are
guaranteed over an extended temperature range of
-25°C to +85°C.
This is a product in the pre-production phase of development. Device
characterization is complete and Ramtron does not expect to change the
specifications. Ramtron will issue a Product Change Notice if any
specification changes are made.
Rev. 2.4 (obsolete)
Feb. 2009
CS
1
8
VDD
SO
2
7
HOLD
WP
3
6
VSS
4
2
FM
:
/CS
SO
/WP
VSS
L2
5
5
1
8
2
7
3
6
4
5
6B
5
SCK
SI
VDD
/HOLD
SCK
SI
Top View
Pin Name
/CS
/WP
/HOLD
SCK
SI
SO
VDD
VSS
Function
Chip Select
Write Protect
Hold
Serial Clock
Serial Data Input
Serial Data Output
Supply Voltage (3.0 to 3.6V)
Ground
Ordering Information
FM25L256-S
FM25L256-G
FM25L256-DG
8-pin SOIC
“Green” 8-pin SOIC
“Green” 8-pin TDFN
Ramtron International Corporation
1850 Ramtron Drive, Colorado Springs, CO 80921
(800) 545-FRAM, (719) 481-7000
www.ramtron.com
Page 1 of 14
