CCC
Vishay Electro-Films
CHIP
RESISTORS
Thin Film, 1010 Center-Tapped Resistors on Alumina
FEATURES
• Wire bondable
• Larger single size for extended value range
Product may not
be to scale
• Resistance range total: 100 Ω to 1 MΩ
Custom values: RA or RB - 50 Ω to 500 kΩ
• Power: 400 mW
The CCC series resistor chips offer good 400 mW power, low
shunt capacitance and a center tap feature.
The CCCs nichrome resistor material offers excellent stability.
The CCCs are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology.
The CCCs are 100 % electrically tested and visually
inspected to MIL-STD-883.
• Alumina substrate
• Low stray capacitance: < 0.2 pF
• Resistor material: Nichrome
APPLICATIONS
Vishay EFI CCC chip resistors provide excellent high-frequency response and are ideally suited for prototyping.
Typical application areas are:
• Amplifiers
• Couplers
• Oscillators
• Filters
• Attenuators
Recommended for hermetic environment where die is not exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
PROCESS CODE
Tightest Standard Tolerance Available
0.1 %
CLASS H*
203
200
201
202
*MIL-PRF-38534 inspection criteria
± 10 ppm/°C
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
100 Ω
200 Ω
500 kΩ
CLASS K*
207
204
205
206
1 MΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
- 20 dB typ.
Center Tap Ratio, RA/RB: Tolerance
1±1%
Stability, 1000 h, + 125 °C, 400 mW
± 0.1 % max. ΔR/R
Operating Temperature Range
- 55 °C to + 125 °C
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
± 0.25 % max. ΔR/R
High Temperature Exposure, + 150 °C, 100 h
± 0.25 % max. ΔR/R
Dielectric Voltage Breakdown
400 V
1012 min.
Insulation Resistance
Operating Voltage
200 V max.
DC Power Rating at + 125 °C
400 mW max.
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
www.vishay.com
70
For technical questions, contact: efi@vishay.com
± 0.25 % max. ΔR/R
Document Number: 61010
Revision: 11-Mar-08