BT105S thru BT110S
SURFACE MOUNT GLASS PASSIVATED
BRIDGE RECTIFIERS
REVERSE VOLTAGE - 50 to 1000 Volts
FORWARD CURRENT - 1.0 Ampere
BTS
FEATURES
.071(1.8)
.055(1.4)
●Rating to 1000V PRV
●Ideal for printed circuit board
●Lead tin plated copper
MECHANICAL DATA
.030(0.75)
.018(0.45)
●Polarity:Symbol molded on body
.157(4.0)
.142(3.6)
- +
~ ~
molded plastic technique results in inexpensive product
.014(.35)
.006(.15)
.106(2.7)
.09(2.3)
●Mounting position :Any
.043(1.1)
.027(0.7)
.276(7.0)
.260(6.6)
C0.5
●Reliable low cost construction utilizing
.197(5.0)
.181(4.6)
.063(1.6)
.047(1.2)
.008(0.2)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS
SYMBOL BT105S
BT11S
BT12S
BT14S
BT16S
BT18S
BT110S
UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
V
Maximum Average Forward
Rectified Current (Note 1)
Peak Forward Surge Current
1.0
A
30
A
VF
8.3ms Single Half Sine-Wave
I(AV)
IFSM
@T A=40 ℃
1.1
V
Super Imposed on Rated Load(JEDEC Method)
Peak Forward Voltage at 1.0A DC
Maximum DC Reverse Current
@T J=25℃
at Rated DC Bolcking Voltage
@T J=125℃
Typical Junction Capacitance Per Element (Note2)
Thermal Resistance (Note3)
Thermal Resistance (Note4)
Operating Temperature Range
Storage Temperature Range
IR
5.0
500
μA
CJ
10
pF
RθJA
95
℃/W
RθJC
30
℃/W
TJ
-55 to +150
℃
TSTG
-55 to +150
℃
NOTES:1.Mounted on P.C. board.
2.Measured at1.0MHz and applied reverse voltage of 4.0V DC.
3.Thermal resistance junction to ambient
4.Thermal resistance junction to case
REV. 1, 08-Nov-2012