HOME在庫検索>在庫情報

部品型式

DS1231S-35

製品説明
仕様・特性

DS1231/S DS1231/S Power Monitor Chip FEATURES PIN ASSIGNMENT • Warns processor of an impending power failure IN processor from destroying nonvolatile memory during power transients • Automatically 8 VCC 2 7 NMI TOL • Prevents 1 MODE • Provides time for an orderly shutdown 3 6 RST 4 5 RST GND restarts processor after power is restored DS1231 8–Pin DIP (300 MIL) See Mech. Drawings Section • Suitable for linear or switching power supplies • Adjusts to hold time of the power supply NC 1 16 NC IN • Supplies necessary signals for processor interface 2 15 VCC 3 14 13 NC 12 NC RST NC NC MODE • Accurate 5% or 10% VCC monitoring • Replaces power-up reset circuitry NC 4 5 TOL 6 • No external capacitors required NC GND 7 11 10 8 9 • Optional 16-pin SOIC surface mount package NMI RST DS1231S 16–Pin SOIC (300 MIL) See Mech. Drawings Section PIN DESCRIPTION IN MODE TOL GND RST RST NMI VCC NC – – – – – – – – – Input Selects input pin characteristics Selects 5% or 10% VCC detect Ground Reset (Active High) Reset (Active Low, open drain) Non–Maskable Interrupt +5V Supply No Connections DESCRIPTION The DS1231 Power Monitor Chip uses a precise temperature-compensated reference circuit which provides an orderly shutdown and an automatic restart of a processor-based system. A signal warning of an impending power failure is generated well before regulated DC voltages go out of specification by monitoring high voltage inputs to the power supply regulators. If line isolation is required a UL-approved opto-isolator can be directly interfaced to the DS1231. The time for processor shutdown is directly proportional to the available hold-up time of the power supply. Just before the hold-up time is exhausted, the Power Monitor unconditionally halts the processor to prevent spurious cycles by enabling Reset as VCC falls below a selectable 5 or 10 percent threshold. When power returns, the processor is held inactive until well after power conditions have stabilized, safeguarding any nonvolatile memory in the system from inadvertent data changes. 022698 1/9

ブランド

DS

供給状況

 
Not pic File
お求め商品DS1231S-35は、クレバーテックの営業スタッフが在庫調査を行いメールにて結果を御連絡致します。

「見積依頼」ボタンを押してお気軽にお問合せ下さい。

送料

お買い上げ小計が1万円以上の場合は送料はサービスさせて頂きます。
1万円未満の場合、また時間指定便はお客様負担となります。
(送料は地域により異なります。)


お取引内容はこちら
DS1231S-35の取扱い販売会社 株式会社クレバーテック  会社情報(PDF)    戻る


0.0694828033