HOME＞在庫検索＞在庫情報
DS1231S-20
DS1231/S Power Monitor Chip www.dalsemi.com FEATURES § § § § § § § PIN ASSIGNMENT Warns processor of an impending power failure Provides time for an orderly shutdown Prevents processor from destroying nonvolatile memory during power transients Automatically restarts processor after power is restored Suitable for linear or switching power supplies Adjusts to hold time of the power supply Supplies necessary signals for processor interface Accurate 5% or 10% VCC monitoring Replaces power-up reset circuitry No external capacitors required Optional 16-pin SOIC surface-mount package IN 1 8 VCC MODE 2 7 NMI TOL 3 6 RST GND 4 5 RST DS1231 8-Pin DIP (300-mil) See Mech. Drawings Section NC 1 16 NC IN 2 15 VCC NC 3 14 NC MODE 4 13 NMI NC 5 12 NC TOL 6 11 RST NC 7 10 NC GND § § § § 8 9 RST DS1231S 16-Pin SOIC (300-mil) See Mech. Drawings Section PIN DESCRIPTION IN MODE TOL GND RST - Input - Selects input pin characteristics - Selects 5% or 10% VCC detect - Ground - Reset (Active High) RST - Reset (Active Low, open drain) - Non-Maskable Interrupt - +5V Supply - No Connections NMI VCC NC DESCRIPTION The DS1231 Power Monitor Chip uses a precise temperature-compensated reference circuit which provides an orderly shutdown and an automatic restart of a processor-based system. A signal warning of an impending power failure is generated well before regulated DC voltages go out of specification by monitoring high voltage inputs to the power supply regulators. If line isolation is required a UL-approved opto-isolator can be directly interfaced to the DS1231. The time for processor shutdown is directly proportional to the available hold-up time of the power supply. Just before the hold-up time is exhausted, the Power Monitor unconditionally halts the processor to prevent spurious cycles by enabling Reset as 1 of 9 010700
弊社からの見積回答メールの返信又はFAXにてお願いします。
