HOME＞在庫検索＞在庫情報
YLR-08V
YL CONNECTOR 4.5mm pitch/Disconnectable Crimp style Wire-to-wire connectors Specifications ––––––––––––––––––– Panel lock • Current rating: 10A AC, DC max. (7A when retainers are mounted) • Voltage rating: 300V AC, DC max. • Temperature range: -25˚C to +90˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/7m Ω max. After environmental testing/10m Ω max. • Insulation resistance: 1,000M Ω min. • Withstanding voltage: 1,500V AC/minute • Applicable wire: AWG #26 to #16 0.13 to 1.25mm2 • Applicable panel thickness: 0.7 to 2.0mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Inner lock Retainer Housing lance Note: The current rating varies depending on the number of circuits and the wire size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. The retainer features added protection against non-insertion or disconnection. Current unit: A Circuits #24 #26 4 3 2 10 7 5 4 3 2 9 6 4 4 3 2 9 6 4 4 3 2 6 8 5 3 3 2 2 8 7 4 3 3 2 2 9 6 4 3 3 2 2 12 6 3 2 2 2 2 15 5 3 2 2 2 1 16 5 3 2 2 2 1 21 1 2 R9351052 #22 5 4 Certified LR20812 #20 7 3 Recognized E60389 #18 10 2 Standards –––––––––––––––––––– #16 1 • Housing lance • Secondary retainers • Inner-housing lock • Panel lock construction 0 Wire size (AWG) 5 3 2 2 2 1 Note: Secondary retainers cannot be used with AWG #16 wires. Panel Layout and Assembly layout A B 35.1 38.7 (including retainer) 9.5 10.8 15.3 16.6 20.5 9.8 3.2 Single row 2・3 2-row 4・6・8・12・16 3-row 9・12・15・21 Dimensions (mm) A B 21.8 D C Circuits E Type A B Panel thickness Cir- Receptacle (mm) cuits housing Model No. Dimensions (mm) 2 YLR-02V 3 YLR-03V 4 YLR-04V 6 YLR-06V 8 YLR-08V 9 YLR-09V YLR-12V 12 YLR-12VA 15 YLR-15V 16 YLR-16V 21 YLR-21V 0.7 to 2.0 0.7 to 0.8 0.9 to 1.3 1.4 to 2.0 D±0.1 E±0.1 D±0.1 E±0.1 D±0.1 E±0.1 A B C 10.7 16.8 7.1 4.4 1.35 5.0 1.05 5.6 0.75 15.3 21.3 7.1 4.4 1.35 5.0 1.05 5.6 0.75 10.7 16.8 12.9 7.1 2.9 7.7 2.6 8.3 2.3 15.3 21.3 12.9 7.1 2.9 7.7 2.6 8.3 2.3 19.8 25.8 12.9 7.1 2.9 7.7 2.6 8.3 2.3 15.3 21.3 18.2 7.1 5.55 7.7 5.25 8.3 4.95 19.8 25.8 18.2 7.1 5.55 7.7 5.25 8.3 4.95 28.9 34.8 12.9 7.1 2.9 7.7 2.6 8.3 2.3 24.4 30.3 18.2 7.1 5.55 7.7 5.25 8.3 4.95 37.9 43.8 12.9 7.1 2.9 7.7 2.6 8.3 2.3 33.5 39.3 18.2 7.1 5.55 7.7 5.25 8.3 4.95 Note: 1. Punch holes in the panel according to the figures and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. 1
JST
日本圧着端子製造株式会社
日本
主にコネクタ、圧着端子を製造する電子接続部品メーカー。
宅配業者の代金引換又は商品到着後一週間以内の銀行振込となります。
