ACPL-M60L
Small Outline, 5 Leads, High CMR, High-Speed,
Logic Gate Optocouplers
Data Sheet
Description
Features
The ACPL-M60L is an optically coupled gate that combines a
GaAsP light emitting diode and an integrated high gain photo
detector. The output of the detector IC is an open collector
Schottky-clamped transistor. The internal shield provides a
guaranteed common mode transient immunity specification of
15 kV/μs at 3.3V operation.
This unique design provides maximum AC and DC circuit
isolation while achieving LVTTL/LVCMOS compatibility. The
optocoupler AC and DC operational parameters are
guaranteed from –40°C to +100°C, allowing trouble-free
system performance.
These optocouplers are suitable for high speed logic
interfacing, input/output buffering, as line receivers in
environments that conventional line receivers cannot tolerate
and are recommended for use in extremely high ground or
induced noise environments.
Applications
Figure 1 Functional Diagram
ANODE 1
6 VCC
5 VO
CATHODE 3
CAUTION
4 GND
Dual voltage operation (3.3V/5V)
15 kV/μs minimum Common Mode Rejection (CMR) at
VCM = 1000V (3.3V operating voltage)
High speed: 15 MBd typical
LVTTL/LVCMOS compatible
Low input current capability: 5 mA
Guaranteed AC and DC performance over temperature:
–40°C to +100°C
Safety approvals; UL, CSA, IEC/EN/DIN EN 60747-5-5
(Pending)
Surface mountable
Very small, low profile JEDEC Registered package outline
It is advised that normal static precautions be
taken in handling and assembly of this
component to prevent damage and/or
degradation that may be induced by ESD. The
components featured in this data sheet are not
to be used in military or aerospace applications
or environments.
Broadcom
-1-
Isolated line receiver
Computer-peripheral interfaces
Microprocessor system interfaces
Digital isolation for A/D, D/A conversion
Switching power supply
Instrument input/output isolation
Ground loop elimination
Pulse transformer replacement
Field buses
