HOME在庫検索>在庫情報

部品型式

UUD1V151MNL1GS

製品説明
仕様・特性

ALUMINUM ELECTROLYTIC CAPACITORS UD Chip Type, Low Impedance series Chip type, low impedance temperature range up to +105°C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2002/95/EC). WD High Te m p reflow UD Low Impedance CD WG Low Impedance Specifications Performance Characteristics Item Category Temperature Range – 55 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 1500µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Rated voltage (V) 6.3 10 16 25 35 50 tan δ (MAX.) 0.26 (0.28) 0.20 (0.24) 0.16 (0.20) 0.14 (0.16) 0.12 (0.14) 0.12 (0.14) Tangent of loss angle (tan δ) ( ) is φ8 over Measurement frequency : 120Hz 6.3 3 5 Rated voltage (V) Z– 25°C / Z+20°C Z– 55°C / Z+20°C Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) 10 2 4 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours (2000 hours for φD = 4, 5 and 6.3) at 105°C. Endurance 25 2 3 16 2 4 35 2 3 Capacitance change tan δ Leakage current 50 2 3 Within ±30% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within ±10% of the initial capacitance value maintained at 250°C. The capacitors shall meet the characteristic Less than or equal to the initial specified value tan δ requirements listed at right when they are removed from the plate Less than or equal to the initial specified value Leakage current and restored to 20°C. Shelf Life Resistance to soldering heat Black print on the case top. Marking Type numbering system (Example : 16V 22µF) Chip Type (φ4 to φ6.3) 0.5 MAX. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A±0.2 UUD 1 C 2 2 0 M C L 1 GS Package code Configuration A±0.2 E L±0.3 Capacitance Lot No. C±0.2 B±0.2 φD±0.5 Series A2 22C UD Voltage (C:16V) Positive Plastic platform 0.3 MAX. H φD 4 to 6.3 Rated capacitance (22µF) 8 • 10 Rated voltage (16V) Capacitance tolerance (±20%) Negative Code CL NL Series name Type (φ8 to φ10 ) Lot No. 10 A 16 C 25 E 35 V 0.5 MAX. (mm) φD×L A±0.2 A±0.2 E L±0.5 Capacitance Negative Pressure relief vent Voltage V 6.3 Code j C±0.2 B±0.2 A2 100V UD Trade mark Plastic platform 0.3 MAX. Series φD±0.5 Voltage (V:35V) Positive A B C E L H 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10 1.8 4.3 4.3 1.0 5.8 0.5 to 0.8 2.1 5.3 5.3 1.3 5.8 0.5 to 0.8 2.4 6.6 6.6 2.2 5.8 0.5 to 0.8 2.4 6.6 6.6 2.2 7.7 0.5 to 0.8 2.9 8.3 8.3 3.1 10 0.8 to 1.1 3.2 10.3 10.3 4.5 10 0.8 to 1.1 H 50 H Dimension table in next page. CAT.8100B

ブランド

NICHICON

会社名

ニチコン株式会社

本社国名

日本

事業概要

コンデンサなどの開発、製造、販売している企業である。

供給状況

 
Not pic File
お探し部品UUD1V151MNL1GSは、クレバーテックの担当が市場調査を行いemailにて結果を御報告致します。

「見積依頼」をクリックして どうぞお問合せください。

送料

お買い上げ小計が1万円以上の場合は送料はサービスさせて頂きます。
1万円未満の場合、また時間指定便はお客様負担となります。
(送料は地域により異なります。)


お取引内容はこちら

0.0650210381