The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
QR/P4 SERIES
Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels
Oct.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
General
QR/P4 Series is a series of small connectors for rack
and panel application. This is a smaller-size version of
the QR/P and QR/P1 Series, whose rectangular multielectrode plug in connectors for racks and panels have
been well received in the market.
Six models with different numbers of contacts are
available: 8, 12, 16, 24 32 and 40. Wires are connected
to the connectors without solder for easier connection
and higher reliability.
Features
(1) The pins can be smoothly inserted into the receptacle, and give stable contact pressure bcause of their
point contact with the receptacle blades.Furthermore,
they have a larger allowance for the variation of connection length - a characteristic of plug-in connections.
(2) The connector size has been made smaller by separating the terminals for signals from those for voltage
supply.
(3) The pitch of the signal terminals inside the housing is
2.54mm. Tow pairs of diametrically opposed electrodes (four electrodes in total) on the two sides are
arranged with a pitch of 5.08mm so that they can
(4)
(5)
(6)
(7)
withstand high voltage, and can be used for power
supply. In addition, a nonflammable material (UL94V0) is used as the insulating housing of the connectors.
Guide pins and the housing body are molded as one
piece to achieve a smaller connector size.
Since the connectors are mounted on racks or panels with stepped screws, connection and disconnection can be done easily.
The contact for female terminals in the housing is
deeper than the fitting surface of the housing which
conforms to the finger test (UL Standard 1950).
The connectors of this series have passed UL, CSA
and TÜV standard.
Application
PPC, Transmission and reception equipment, Data Communication, Vending Machine, Measuring Instruments,
Automatic Equipment, Switchboards, etc.
151
04/2009
