PC3SD12NTZ Series
PC3SD12NTZ
Series
VDRM : 600V, Cost effective
Non-zero cross type
DIP 6pin
Phototriac Coupler for triggering
■ Description
■ Agency approvals/Compliance
PC3SD12NTZ Series Phototriac Coupler include an
infrared emitting diode (IRED) optically coupled to an
output Phototriac.
These devices feature full wave control and are
ideal isolated drivers for medium to high current Triacs.
DIP package provides 5.0kV isolation from input to
output with superior commutative noise immunity.
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. 3SD12)
2. Approved by CSA, file No. CA95323 (as model No.
3SD12)
3. Optionary available VDE Approved (∗)(DIN EN 607475-2), file No. 40008189 (as model No. 3SD12)
4. Package resin : UL flammability grade (94V-0)
(∗)
DIN EN60747-5-2 : successor standard of DIN VDE0884.
Up to Date code "RD" (December 2003), approval of DIN
VDE0884.
From Date code "S1" (January 2004), approval of DIN
EN60747-5-2.
(∗∗)
Reinforced insulation type is also available.
(PC3SF11YVZ Series)
■ Features
1. High repetitive peak off-state voltage (VDRM : 600V)
2. Non-zero crossing functionality
3. 6 pin DIP package
4. Superior noise immunity (dV/dt : MIN. 1 000V/µs)
5. Double transfer mold construction (Ideal for Flow
Soldering)
6. High isolation voltage between input and output
(Viso(rms) : 5.0kV)
■ Applications
1. Triggering for Triacs used to switch on and off
devices which require AC Loads.
For example heaters, fans, motors, solenoids, and
valves.
2. Triggering for Triacs used for implementing phase
control in applications such as lighting control and
temperature control (HVAC).
3. AC line control in power supply applications.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
Sheet No.: D2-A07701FEN
Date Mar. 31. 2004
© SHARP Corporation
