FC
Vishay Dale Thin Film
High Frequency (up to 20 GHz) Resistor,
Thin Film Surface Mount Chip
FEATURES
• Small standard size 0402 case size
• Edge trimmed block resistors
• Alumina substrate high purity (99.6 %)
• Ohmic range (10 to 1000 )
• Small internal reactance (< 10 m)
• Low TCR (down to ± 25 ppm/°C)
• Epoxy bondable termination available
FC series chip resistors are designed with low internal
reactance. They function as almost pure resistors on a very
high range of frequencies. The specialized laser edge
trimming allows for precision tolerances to 0.1 %.
• Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
• Low noise amplifiers
• Attenuation
• Line termination
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Material
Passivated nichrome
-
10 to 1000
Case size dependent
± 25 ppm/°C (standard) ( 50 ) to ± 100 ppm/°C
- 55 °C to + 125 °C
Resistance Range
TCR: Absolute
CONDITIONS
Tolerance: Absolute
± 0.1 % to ± 5.0 %
+ 25 °C
R ± 0.02 %
2000 h at 70 °C
-
-
0.1 ppm/V
-
30 V to 75 V
Stability: Absolute
-
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
- 55 °C to + 125 °C
-
Storage Temperature Range
- 55 °C to + 150 °C
-
< - 35 dB
-
R ± 0.01 %
1 year at + 25 °C
Noise
Shelf Life Stability: Absolute
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE ()
0402
50
30
16 to 1000
0505
125
37
20 to 1000
0603
125
50
10 to 1000
0805
200
50
10 to 1000
1005
250
75
10 to 1000
1206
330
75
10 to 1000
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
Document Number: 60093
Revision: 05-Dec-11
For technical questions, contact: thinfilm@vishay.com
www.vishay.com
73
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000